Modelling, Identification, and Control    (MIC 2005)

February 16 – 18, 2005
Innsbruck, Austria
Editor(s): M.H. Hamza
609 pages
Other Years:

Abstracts may contain minor errors and formatting inconsistencies.
Please contact us if you have any concerns or questions.

Track Control Systems FreeSubscription
457-011 A Frequency Response based Design of Suboptimal Reduced Order Controller
M. Chetty (Australia)
Abstract
457-034 Decay Rate Fuzzy Controller Design with Piecewise Lyapunov Functions
M. Bernal and P. Hušek (Czech Republic)
Abstract
457-038 Fractional Order Dynamics in Some Distributed Parameter Systems
J.A. Tenreiro Machado and I.S. Jesus (Portugal)
Abstract
457-110 Dynamic Canonical Descent and Densification: A Direct Method for Optimal Control
K. Bousson, S.D. Correia, and M.E. Baltazar (Portugal)
Abstract
457-111 A Study on Discrete Sliding Mode Control: Robustness Analysis and Experimental Investigation
K. Abidi and A. Şabanoviç (Turkey)
Abstract
457-120 LQG Regulators with Prescribed Closed-Loop Poles
T. Fujinaka and S. Omatu (Japan)
Abstract
457-134 IMC based, Robust PID Controller Tuning for SUT Building Energy Management System
M. Fardadi, A. Selk Ghafari, and S.K. Hannani (Iran)
Abstract
457-161 A Design of Safety Controller with Damping Excessive Transient Energy Consumption of Vehicle Motion
Y. Yamane (Japan)
Abstract
457-164 Properties of State-Feedback: Explained by Transfer Function Representations
Cs. Bányász and L. Keviczky (Hungary)
Abstract
457-167 A Multi-Dimensional Scheme for Controlling Unstable Periodic Orbits in Chaotic Systems
N. Chakravarthy, K. Tsakalis, L.D. Iasemidis, and A. Spanias (USA)
Abstract
457-187 Control of Molecular Orientation and Alignment by Monotonic Schemes
J. Salomon and G. Turinici (France)
Abstract
457-195 Convex Set of Matrices in Switched Systems
F. Rios and E. Rubio (Mexico)
Abstract
Track Hybrid and Non-Linear Systems FreeSubscription
457-008 Second-Order LuGre Friction Model
L. Acho, J. Moreno, and R. Guerra (Mexico)
Abstract
457-019 Design of an Augmented Automatic Choosing Control of Anti-Windup Type for Nonlinear Systems with Constrained Inputs
T. Nawata and H. Takata (Japan)
Abstract
457-026 BIBO Stability for NOE Model Structure using HL CPWL Functions
L.R. Castro, J.L. Figueroa, and O.E. Agamennoni (Argentina)
Abstract
457-079 Monotonically Convergent Algorithms for Locally Constraint Quantum Controls
G. Turinici (France)
Abstract
457-185 A Hybrid Control Approach for Sampled Data Nonlinear Systems
J.M. Andrade Da Silva, P.A. Teppa Garrán, and J.J. Ferrer Suárez (Venezuela)
Abstract
Track Adaptive and Intelligent Control FreeSubscription
457-016 Predictive and Prognosticative Tracking for Intercept Control
S.C. Stubberud and K.A. Kramer (USA)
Abstract
457-027 Stochastic Model Predictive Control: An Alternative Approach for the Online Implementation
M. Nechtelberger and A. Hofer (Austria)
Abstract
457-067 Application of Uncertain Variables and Learning Process to Decision Making in a Class of Complex Systems
Z. Bubnicki (Poland)
Abstract
457-091 Adaptive Nonlinear Controller Design using Input Normalized Neural Networks
H. Lee, H. Bang, and C.-H. Hong (Korea)
Abstract
457-127 The Adaptive Integral Multi-Observer with Switched Moving Windows
W. Byrski and M. Pelc (Poland)
Abstract
457-147 A New Fuzzy-Neural System for Time Series Forecasting
A. Thammano and S. Palahan (Thailand)
Abstract
457-199 A Loop-Shaping Approach to Intelligent Control
Y. Frayman and B.F. Rolfe (Australia)
Abstract
457-804 A New FNN-based Modelling Strategy for Improving Control Capability of Track-Following Performance for Optical Disk Drives Utilizing the Gram-Schmidt Algorithm
W.-N. Huang, C.-C. Teng, W.-P. Chen, and C.-H. Chen (Taiwan)
Abstract
Track Estimation and Parametric Identification FreeSubscription
457-046 System Identification using Mixed Total Least Squares by Rotating the System of Coordinates
D. Pachner, J. Pekař, M. Cepák, and J. Štecha (Czech Republic)
Abstract
457-050 A Rare-Update Sigma-Point Kalman Filter as Parameter Estimator
J. Fox and H. Janocha (Germany)
Abstract
457-076 Motion Identification of Planar Free-Form Objects
M. Unel (Turkey) and B.K. Ghosh (USA)
Abstract
457-084 A New Design of Analog Filters via Convex Programming
N.T. Hoang (Japan), H.D. Tuan (Australia), P. Apkarian (France), and S. Hosoe (Japan)
Abstract
457-097 Hybrid ARMA/FNN Model for the Compensation of Thermal Deformation in Machine Tools
Y. Kang, C.-W. Chang, M.-H. Chu, Y.-P. Chang, and S.-Y. Chien (Taiwan)
Abstract
457-124 Determination of Linear Object Dynamics Class and Conception of Template Identification Net Construction
J. Wesołowski (Poland)
Abstract
457-152 A Combined Method for Blind Identification of ARMA Systems
R. Shaghaghi-Kandovan (Iran)
Abstract
457-155 Nonlinear Modeling and PWM Integrated Controller Design for a Pneumatic Actuator
E.A. Semerci and Ö. Ateşoğlu (Turkey)
Abstract
457-162 Continuous-Time Model Identification using Adaptive Observers – On the Selection of State Variable Filters
K. Ikeda, Y. Mogami, and T. Shimomura (Japan)
Abstract
457-184 Identification of Human Skill
H. Kobayashi, Y. Ohyama, J.-H. She, Y. Kimura, and H. Hashimoto (Japan)
Abstract
457-186 Application of Adaptive Tabu Search to System Identification
D. Puangdownreong, K.-N. Areerak, K.-L. Areerak, T. Kulworawanichpong, and S. Sujitjorn (Thailand)
Abstract
457-805 Nonlinear Model Parameter Estimation by Global Optimization Applied to an Industrial Glass Feeder
P. Havel and P. Horáček (Czech Republic)
Abstract
Track Process Control FreeSubscription
457-047 Management of Log Delay Time with Drumming Parameters
A.K. Hyvönen, A.H. Isokangas, K.E.E. Pöllänen, and J.J. Niinimäki (Finland)
Abstract
457-088 An Adaptive Ratio Control Solution for a Water Cooling System in a Wire Rod Mill
T. Yli-Fossi and P. Lautala (Finland)
Abstract
457-094 Multi-Loop Control Scheme of a Cement Kiln
A.-C. Witsel, V. Barbieux, C. Renotte, and M. Remy (Belgium)
Abstract
457-142 A Robust 2DOF PID Controller Design for Time-Delay Systems based on H2 Optimization
T. Kawabe (Japan)
Abstract
457-168 Inferential MRAC Neural Controller for Temperature Control of CST Process
L.M. Waghmare, S.C. Saxena, and V. Kumar (India)
Abstract
457-175 Implementation of H2 Optimal Controller with Integral Action
J. Mikleš, M. Fikar, L'. Čirka, and L. Dermíšek (Slovak Republic)
Abstract
457-808 Time Delay Effects on the Frequency Domain Description of a Discrete Linear Heating System
M. Sarhan (USA)
Abstract
457-809 Control of Combustion with Genetic Learning Automata
Z. Hímer (Finland), G. Dévényi (Hungary), J. Kovács, and U. Kortela (Finland)
Abstract
Track Robotics FreeSubscription
457-017 Sliding Mode-Iterative Learning Control Applied to DELTA Parallel Robot
R. Yakhlef and M. Hamerlain (Algeria)
Abstract
457-023 Experimental Results of an Impedance-Controlled PKM for Assembly Tasks
L. Bruzzone, R.M. Molfino, and M. Zoppi (Italy)
Abstract
457-085 New Visual Control for Guidance of a Mobile Robot
L. Sun and S. Uchikado (Japan)
Abstract
457-093 Wave Theory Applied to Vibration Control of Elastic Robot Arms
T.W. Yang and W.J. O'Connor (Ireland)
Abstract
457-157 A Fixed-Weight RNN Dynamic Controller for Multiple Mobile Robots
M. Oubbati, P. Levi, and M. Schanz (Germany)
Abstract
457-188 Kinematic Model of Three Links Robot for Generating Elliptical Path
M.-H. Hsu, J.-Y. Liu, and L.-C. Hsieh (Taiwan)
Abstract
Track Energy and Power Systems FreeSubscription
457-007 An Incremental Constructive Layer Neural Network based Power System Stabiliser
N.P. Bidargaddi, M. Chetty, and J. Kamruzzaman (Australia)
Abstract
457-018 A Chaotic Mutation Sequence Evolutionary Programming for PID Parameters Optimization of Hydro Turbine Governing Systems
C. Jiang and X. Fang (PRC)
Abstract
457-035 The Modeling of Power Management for Complex System using Normal Distribution
T. Chen, J. Huang, H. Dai, and Huwei (PRC)
Abstract
457-051 Transfer Function Analysis of the Direct Methanol Fuel Cell's Response to Dynamic Changes in Cell Current
U. Krewer and K. Sundmacher (Germany)
Abstract
457-075 Modelling and Simulation for Magnetic Flux Distribution in Induction Motors
P. Pao-la-or, S. Peaiyoung, T. Kulworawanichpong, and S. Sujitjorn (Thailand)
Abstract
457-080 An Alternative Newton-Raphson Power Flow Method based on Current-Balanced Equations
T. Kulworawanichpong, T. Ratniyomchai, P. Pao-la-or, and B. Borriboon (Thailand)
Abstract
457-101 Increasing the Electrical Power of Alternators – Numerical Simulation Approach
E. Ceuca, N. Crainic, and G. Chindriş (Romania)
Abstract
457-108 Efficient Re-Formulation of Linear Cogeneration Planning Models
R. Lahdelma and A. Rong (Finland)
Abstract
457-158 Model based Fault Detection for Hydraulic Motors
C. Angeli and A. Chatzinikolaou (Greece)
Abstract
457-193 Dynamic Parameter Identification of Induction Motors using Intelligent Search Techniques
T. Kulworawanichpong, K.-L. Areerak, K.-N. Areerak, P. Pao-la-or, D. Puangdownreong, and S. Sujitjor (Thailand)
Abstract
457-810 A Chaos Mutation and Metropolis Selection Evolutionary Programming for Multi-Objective Optimization in Power System
C. Jiang (PRC)
Abstract
457-811 A New Forecasting Method for Chaotic Electric Load Series with Higher Embedded Dimension
C. Jiang and C. Wang (PRC)
Abstract
Track Biomedical Applications FreeSubscription
457-056 Modelling and Simulation of Scoliotic Deformities
F. Cheriet, D. Jiang, and N.F. Stewart (Canada)
Abstract
457-077 FEM Modelling and Simulation of Corneal Tissue Behaviour, based on Incisions at Human Eyes
K.P. Scherer, H. Guth, P. Stiller (Germany), and W. Wackernagel (Austria)
Abstract
457-102 Comparison of Servocontrol and Regulatory Approaches based on Linear Quadratic Optimal Control for Continuous Glucose Control in Diabetic Patients
I.Y. Sánchez Chávez, R. Morales-Menéndez, and S.O. Martínez Chapa (Mexico)
Abstract
457-153 The Importance of Arterial Compliance, When Blood Flows and Pressures are Assumed to be Random Processes
A. Vrettos (USA)
Abstract
457-160 The Role of Arterial Compliance and Heart Rate in Reducing the Left Ventricular Load
A. Vrettos (USA)
Abstract
457-173 Application of the Sobol´ Global Sensitivity Analysis Method to a Dynamic Model of MAb-Producing Mammalian Cell Cultures
C. Kontoravdi, A. Mantalaris, S.P. Asprey, and E.N. Pistikopoulos (UK)
Abstract
457-197 Synchronization of Large Scale Oscillator Networks
X. Chen (Japan)
Abstract
Track Modelling and Simulation I FreeSubscription
457-087 Perturbation Analysis of Tandem 2-Class Stochastic Fluid Models for Control and Optimization of Tandem Networks
S. Nosrati and M. Sabaei (Iran)
Abstract
457-092 Sampling-based Performance Prediction of Raytracing
S. Juhász and A. Csikvári (Hungary)
Abstract
457-100 Automated 3D-Scanning and Analysis of Archaeological Objects
H. Mara (Austria)
Abstract
457-114 Dynamical Reconstruction of a 3D Elevation Map using Stereovision from a Mobile Robot
P. Di Giamberardino and A. Usai (Italy)
Abstract
457-116 Model Reduction of Interval Metzlerian Systems
J. Yue and B. Shafai (USA)
Abstract
457-117 An On-Hand 3D Acquisition Technique based on Tri-Aperture Lens Configuration
I.-C. Chang, B.-T. Chen, and C.-L. Huang (Taiwan)
Abstract
457-143 Modelling the Dynamics of the Kuramoto-Sivashinsky Equation
N. Smaoui (Kuwait)
Abstract
457-174 Content-based Retrieval of Kamon Images by Image Smoothing and Relaxation
T. Tachikawa, K. Kameyama, T. Kawabe, K. Toraichi, N. Otsu, T. Kurita (Japan), and P.W.H. Kwan (Australia)
Abstract
457-182 A New Functional Approximation Modelling of Image Contours using the Nonuniform Fluency Sampling Function
T. Motoyama, T. Kawabe, K. Nakamura, and K. Toraichi (Japan)
Abstract
457-192 Geometric Modeling of Instantaneous Temperature Distribution in a Turbulent Flame
J. Doi, R. Yoshikawa, W. Sato, and S. Sato (Japan)
Abstract
Track Modelling and Simulation II FreeSubscription
457-003 Simulation of Drill Collar Motion by Laplace Transformation
M.R. Ghazavi and M. Zamanian (Iran)
Abstract
457-013 Approximation of Unsteady Aerodynamic Forces by Use of Fuzzy Techniques
A. Hiliuta, R.M. Botez (Canada), and M. Brenner (USA)
Abstract
457-040 Thruster Fault Detection of the Upper Stage Launch Vehicle Attitude Control System
T.W. Hwang, H.H. Kwon, S.J. Lee, and M.-J. Tahk (Korea)
Abstract
457-045 2D Modelling of Ultrasonic Cleaning Vessels – A Finite Element Approach
J.P. Lewis, S. Gardner, and I. Corp (UK)
Abstract
457-059 Parametric Modelling and CFD Analysis of Maxi Scooter: A Guideline for the Designer
P. Conti, M. Argento, and M.D. Santucci (Italy)
Abstract
457-071 Fuzzy Modelling for Distillation Column
R. Yusof, M. Khalid, and M.F. Ibrahim (Malaysia)
Abstract
457-104 An Optimal Formation Guidance Law for Multiple Unmanned Aerial Vehicles
C.-K. Ryoo, Y.-H. Kim, and M.-J. Tahk (Korea)
Abstract
457-165 An Approach for the Kinematic Design of Three-Speed Gear Mechanisms for Electric Bicycles
L.-C. Hsieh, H.-S. Lee, and M.-H. Hsu (Taiwan)
Abstract
Track Modelling and Simulation III FreeSubscription
457-025 Built-In Self-Test Techniques for Analog and Mixed-Signal Circuits
J. Zakizadeh (Canada), S.R. Das (Canada, USA), M.H. Assaf, E.M. Petriu (Canada), and M. Sahinoglu (U
Abstract
457-033 State-Variable Models of Multifunctional Filters in Current Mode
T. Dostal and M. Sigmund (Czech Republic)
Abstract
457-057 Active RC Circuit Model of the Optimized Second-Order PWL Dynamical System
J. Pospisil, Z. Kolka, J. Brzobohaty, S. Hanus, J. Petrzela, and T. Dostal (Czech Republic)
Abstract
457-068 Cyclic Spectral Analysis of Multi-Carrier DMT Signals
F. Pisoni and M. Bonaventura (Italy)
Abstract
457-113 State-Space Modeling and Analysis for Partial Tracking of Music Signals
H. Satar-boroujeni and B. Shafai (USA)
Abstract
457-170 Human Perception Model for Ultrasonic Difference Tones
T. Sugimoto, T. Kawabe, K. Kameyama, Y. Morooka, and K. Toraichi (Japan)
Abstract
457-190 A Case Study for Partitioned Modelling of a Control System
B. Däne and W. Fengler (Germany)
Abstract
Track Modelling and Simulation IV FreeSubscription
457-062 User Interface Flow Diagram for Smart Phone Application Development
J. Silvennoinen and V. Avatchanakorn (Thailand)
Abstract
457-063 Performance Evaluation with UIF Process
J. Silvennoinen and V. Avatchanakorn (Thailand)
Abstract
457-089 Analysis of User Access Model with Guaranteed Video Contents Delivery
M. Kodama (Japan)
Abstract
457-130 Simulation of Strategical Abilities in Pedestrian Movement using Cellular Automata
J. Wąs and B. Gudowski (Poland)
Abstract
457-176 Supporting the Validity of a Questionnaire Survey using Electroencephalogram
M. Shibukawa, T. Ookura, M. Ooba, Y. Okayama, H. Tsuchiya, Y. Itoh, M. Funada, and S.P. Ni
Abstract
Track Industrial and Manufacturing Systems FreeSubscription
457-049 A Framework to Model Interdependent Engineering Systems
K.-S. Tam and R. Broadwater (USA)
Abstract
457-064 Deadlock Detection and Avoidance Algorithm based on the Relational Matrix
Y.-J. Song and J.-K. Lee (Korea)
Abstract
457-069 Top Down Modeling and Monte Carlo Simulation for Financial & Cost Control in Complex Projects
R. Mosca, R. Revetria, and C. Forgia (Italy)
Abstract
457-140 Software Structure for a Robot Operated Flexible Manufacturing Cell
T. Masood and I. Khan (Pakistan)
Abstract
457-166 Indirect Sensing and Regulation of a Cutting Torque for Prevention of Tool Failure
D.K. Choi, Y.T. Oh, and S.J. Kim (Korea)
Abstract
457-191 Designing a Distributed Workflow System for e-Government
D. Beer, S. Höhne, H. Petersohn, T. Pöhnitzsch, G. Rünger, and M. Voigt (Germany)
Abstract
457-196 Modelling and Simulation of Industrial Systems for Fault Diagnosis Systems Design
J. Sá da Costa and A.R.C. Oliveira (Portugal)
Abstract
457-202 Quality Control and Production Planning Problem of Failure Prone Manufacturing Systems
L.J. Nkeungoué and J.P. Kenné (Canada)
Abstract
Abstracts may contain minor errors and formatting inconsistencies.
Please contact us if you have any concerns or questions.

What are Digital Object Identifers?


Rates (USD):   N/A (Hardcopy) ;  $111.00 (Online) ;  $123.00 (CD)

(The Hardcopy and CD proceedings also include the Online version)

For complete proceedings please choose one of the following:

   

Online Edition $111.00
CD Edition $123.00
Individual Articles (Online): $40.00  
Hard Copy Subscriptions are not available for MIC 2005
ISSN: 1925-1610 ;
ISBN: 0-88986-472-1 ;
ISSN (CD): 1925-1629 ;
ISBN (CD): 0-88986-474-8 ;
ISSN (Online): N/A ;

This publication covers the following topics: Control Systems; Hybrid and Non-Linear Systems; Adaptive and Intelligent Control; Estimation and Parametric Identification; Process Control; Robotics; Energy and Power Systems; Biomedical Applications; Modelling and Simulation; and Industrial and Manufacturing Systems.

Loading Information

Go Back