Control and Applications    (CA 2006)

May 24 – 26, 2006
Montreal, Quebec, Canada
Editor(s): C.-Y. Su
347 pages
Other Years:

Abstracts may contain minor errors and formatting inconsistencies.
Please contact us if you have any concerns or questions.

Track Motors and Position Control FreeSubscription
529-003 An Induction Motor Control Strategy with Full Order Speed Observer
C.-J. Zhang, D.-Z. Zhao, and L.-Y. Hao (PRC)
Abstract
529-021 Nonlinear Multivariable Control of Induction Motor based on Generalized Predictive Control
A. Merabet, M. Ouhrouche, R.-T. Bui, and J.S. Thongam (Canada)
Abstract
529-053 Modeling and Control of a Magnetic Levitation System
T. Meressi and M.C. Kao (USA)
Abstract
529-069 Robust Control of Smart Beam with Pizoelectric Actuators
E. Khanmirza, A. Yousefi-Koma, S. Akbari, and B.T. Zadeh (Iran)
Abstract
529-079 Identification of Power Quality Disturbances in a Three Phase Induction Motor using Fuzzy Logic
P. Prabhakaran and M. Jamil (UAE)
Abstract
529-080 Modeling and Simulation of a VLSI Chip for Adaptive Speed Control of Brushed DC Motors
N. Ekekwe, R. Etienne-Cummings, and P. Kazanzides (USA)
Abstract
529-093 Position Control for the Cabin Support and Feed System of Large Spherical Telescopes
J. Huang, B.-Y. Duan, B. Zi, and Z.-L. Dong (PRC)
Abstract
529-098 Development of a Low-Cost Robotic Manipulator and Its Application to Human Motor Control Studies
C. MacDonald, S. Balakrishnan, and Z. Moussavi (Canada)
Abstract
529-128 Identification and Control of an Induction Motor using Artificial Neural Networks
H.A.F. Mohamed and S. Yaacob (Malaysia)
Abstract
Track Robotic and Manufacturing Systems FreeSubscription
529-002 A Fuzzy Self-Learning Approach to Chatter Control in Milling
M. Liang and D. Xu (Canada)
Abstract
529-013 Fabrication and Control of 4-DOF, Autonomous Robotic Arm using Low Cost AVR Controller
A.W. Butt, J. Iqbal, S. Bano, N. Hassan, and R. Ilyas (Pakistan)
Abstract
529-018 Stochastic Control of Gantry Type Manipulators with Suspended Loads
M. Rachkov and D. Kharin (Russia)
Abstract
529-023 Modal Control of Configuration Dependent Linkage Vibration in Closed-Loop Flexible-Link Mechanisms
X. Wang and J.K. Mills (Canada)
Abstract
529-057 Ambient Intelligence in Manufacturing Industry: Control System Point of View
D. Stokic, U. Kirchhoff, and H. Sundmaeker (Germany)
Abstract
529-066 Underactuated Attitude Control via Orbital Flatness
C.O. Aguilar and A.F. Lynch (Canada)
Abstract
529-086 Noncollocated Sensor Effect on Flexible Robot Control and Stability
A. Green and J.Z. Sasiadek (Canada)
Abstract
529-099 The Conception of the SPRP Manipulator: The Ideal Case
I. Juárez Campos (Mexico)
Abstract
529-116 Cooperative Control for Chained Multiple Process Steps in Semiconductor Manufacturing
Z.J. Mao, W. Kang, F. Wang, and P. Raulefs (USA)
Abstract
529-124 Physical System Modelling for the Design and Control of Mechatronic Systems
S.C. Abou, M. Saad, and T. My-Dao (Canada)
Abstract
529-125 Optimizing Proportional Reward in the Multi Agent RL System
A.A. Zadeh, H.S. Shahhoseini (Iran), and S.K. Afshar (Canada)
Abstract
529-801 A New Position Controller: Pascal's Cartesian Controllers
P. Sánchez-Sánchez, F. Reyes-Cortés, and C. Jiménez-Avalos (Mexico)
Abstract
Track Networks and Simulations FreeSubscription
529-006 Group Key Management in Sensor Networks
B. Panja (USA)
Abstract
529-048 Impact of Coalition and Insurgent Force Levels on Military Casualties in the Iraq Insurgency, 2003-2005
K. Tiedemann (Canada)
Abstract
529-049 Fuzzy State Aggregation and Off-Policy Reinforcement Learning for Stochastic Environments
D.C. Wardell and G.L. Peterson (USA)
Abstract
529-060 Robust Control and Predictive Neural Control Theoretic Approach and Dynamic Analysis of Congested Multi-Router TCP Networks
T. Mehrjerdi (Iran)
Abstract
529-067 Integrated Network of Control, for Technological Processes Applicable to Tritium Processing Plants, with Data Base and Processes Analysis
C.M. Retevoi, I. Stefan, O. Balteanu, L. Stefan, and B. Ciprian (Romania)
Abstract
529-077 Proposed Implementation of Distributed Component Object Model for Network Routing
S. Dhawan and R. Kumar (India)
Abstract
529-095 Design of Discrete Stabilization of Large Scale Interconnected Systems
M. Zazi and N. Elalami (Morocco)
Abstract
529-103 Generalized Probability Data Association Algorithm
Q. Pan, X. Ye, F. Yang, and H. Zhang (PRC)
Abstract
529-105 Automatic Generation Control using Fuzzy Logic
G. Mallesham and A. Rajani (India)
Abstract
529-114 Migration Procedure of Control Laws from a Graphical Simulation Environment to a Robotic Framework
V. Poiré, S. Lemieux, P. Bigras, and M. Blain (Canada)
Abstract
529-121 Uniprocessor Scheduling of Real-Time Systems using Modified Symbolic Modeling Technique
V. Janarthanan and P. Gohari (Canada)
Abstract
529-122 Controlled Simulation of Real-Time Systems
O. Koné (France)
Abstract
Track Optimal Control and Applications FreeSubscription
529-031 On the Evaluation of Quadratic Cost Functionals for Linear Feedback Fractional-Order Systems
C. Hwang and Y.-C. Cheng (Taiwan)
Abstract
529-038 Use of Continuation for Time Optimal Control of Nonlinear Systems
R. Luus and B. Liao (Canada)
Abstract
529-046 Effect of Parametrization on Solving Nonlinear Optimal Control Problems
R. Luus (Canada)
Abstract
529-047 Steady-State Linear Quadratic Tracking Controller for Vibration Suppression
R. Alba-Flores (USA)
Abstract
529-052 Object-Oriented Modeling and Optimal Control of a Biological Wastewater Treatment Process
Q. Chai, R. Bakke, and B. Lie (Norway)
Abstract
529-055 Optimal GPS Antenna Orientation for Argo Satellite
H. You, Y.-W. Jan, and J.-R. Tsai (Taiwan)
Abstract
529-064 Convex Optimization Approach to State Estimation of a Class of Discrete-Time Systems with Time-Delay Nonlinearities
S. Ibrir, W.F. Xie, and C.-Y. Su (Canada)
Abstract
529-085 Optimal Evaluation Algorithms for New Dispersed Sources in Distribution Systems
D. Rho, K. Kwan, Y. Oh, and S. Hong (Korea)
Abstract
529-108 Fuzzy Logic Sliding Controller to Improve the Performance of Boundary Layer Solutions
H.A.F. Mohamed, H.W. Ping, and N.A. Rahim (Malaysia)
Abstract
529-111 An Alternative to DK Iteration for Two-Block µ-synthesis: UQIT
Y. Duan, B. Boulet, and H. Michalska (Canada)
Abstract
529-115 An Enhanced Optimal Sliding Mode Fuzzy Control
H. Allamehzadeh (USA)
Abstract
529-805 Design of Model based LQG Control for Integrated Building Systems
A. Yahiaoui, J. Hensen, L. Soethout, and D. van Paassen (The Netherlands)
Abstract
Track Modelling and Control of Physical Systems FreeSubscription
529-022 Sampled-Data State Estimation of Power Systems
G. Kusic (USA)
Abstract
529-026 Adaptive Output Regulation of Unknown Linear Systems with Unknown Exosystems
I. Mizumoto, D. Hirata, M. Kumon, and Z. Iwai (Japan)
Abstract
529-039 Parameterized Discrete Event Systems under Partial Observation Revisited
H. Bherer, J. Desharnais, and R. St-Denis (Canada)
Abstract
529-056 Hybrid Elman Neural Network Model for Short-Term Traffic Prediction
X.-X. Weng and G.-L. Du (PRC)
Abstract
529-087 Self-Tuning PID Controller based on Recurrent Neural Networks
R. Jafari and R. Dhaouadi (UAE)
Abstract
529-090 An Analysis Method to Delay-Dependent Stability in Time-Delay Linear System
K. Kim and B.-Y. Kim (Korea)
Abstract
529-094 Deterministic Modelling of Vehicle Trajectories
A. Koita, V. Dolcemascolo, and M. Bouteldja (France)
Abstract
529-101 Design of a Control of a Magnetic Bearing via Exact Linearization
B. Rehák, L. Synek, and D. Pachner (Czech Republic)
Abstract
529-113 Complex Envelope Controller for Active Flow Control of Self-Oscillating Pressures
P. Micheau (Canada)
Abstract
529-118 Exergy and Irreversible Entropy Production Thermodynamic Concepts for Control Design: Nonlinear Regulator Systems
R.D. Robinett III and D.G. Wilson (USA)
Abstract
529-127 Using Analogies to Teach Negative Reflex Control Systems to Medical Students
E. Lulis, M. Evens, and J. Michael (USA)
Abstract
529-802 DESA: A Hybrid Optimization Algorithm for High Dimensional Functions
R.C. Addawe, J.M. Addawe, E.P. Adorio, and J.C. Magadia (Philippines)
Abstract
Abstracts may contain minor errors and formatting inconsistencies.
Please contact us if you have any concerns or questions.

What are Digital Object Identifers?


Rates (USD):   $116.40 (Hardcopy) ;  $98.40 (Online) ;  $116.40 (CD)

(The Hardcopy and CD proceedings also include the Online version)

For complete proceedings please choose one of the following:

   

Hard Copy $116.40
Online Edition $98.40
CD Edition $116.40
Individual Articles (Online): $40.00  
ISSN: 1925-1610 ;
ISBN: 0-88986-596-5 ;
ISSN (CD): 1925-1629 ;
ISBN (CD): 0-88986-553-1 ;
ISSN (Online): N/A ;

This publication covers the following topics: Motor and Position Control; Robotic and Manufacturing Systems; Networks and Simulations; Optimal Control and Applications; and Modelling and Control of Physical Systems.

Loading Information

Go Back