Tom Wanjekeche, Dan V. Nicolae, and Adisa A. Jimoh


  1. [1] S. Kouro, J. Rebolledo, and J. Rodriquez, Reduced switching frequency modulation algorithm for high power multilevel inverters, IEEE Transactions on Industrial Electronics, 54(5), 2007, 2894–2901.
  2. [2] D.G. Holmes and B.P. McGrath, Opportunities for harmonic cancellation with carrier-based PWM for two-level and mul-tilevel cascaded inverters, IEEE Transactions on IndustryApplications, 37(2), 2001, 547–582.
  3. [3] M.D. Manjrekar and T.A. Lipo, A generalized structure ofmultilevel power converter, Proc. IEEE PEDS, 1998, 62–67.
  4. [4] K. Corzine and Y. Familiant, A new cascaded multilevelH-bridge drive, IEEE Transactions on Power Electronics,17(1), 2002, 125–131.
  5. [5] G. Carrara, S. Gardella, M. Marcheson, R. Salutari, and G.Sciutto, A new multilevel PWM method: a theoretical analysis,IEEE Transactions on Power Electronics, 7(3), 1992, 495–502.
  6. [6] M.D. Manjrekar and T.A. Lipo, Hybrid multilevel power con-version system: a competitive solution for higher power ap-plication, IEEE Transactions on Industry Applications, 36(3),2000, 834–841.
  7. [7] M. Marchesoni, M. Mazzucchelli, and S. Tenconi, A non-conventional power converter for plasma stabilization, IEEE-PESC’88 Conf. Record, 1988, 122–129.
  8. [8] M.D. Manjrekar and T.A. Lipo, A hybrid multilevel invertertopology for drive applications, IEEE APEC, 1988, 523–529.
  9. [9] C.M. Wu, W.H. Lau, and H. Chung, A five-level neutral-point-clamped H-bridge PWM inverter with superior harmonicssuppression: a theoretical analysis, ISACS’99, Proc. 1999IEEE Int. Symp., 5, 1999, 198–201.
  10. [10] Z. Cheng and B. Wu, A novel switching sequence design for five-level NPC/H-Bridge inverters with improved output voltagespectrum and minimized device switching frequency, IEEETransactions on Power Electronics, 22(6), 2007, 2138–2145.
  11. [11] R. Naderi and A. Rahmati, Phase shifted carrier PWM tech-nique for general cascade inverters, IEEE Transactions onPower Electronics, 23, 2008, 1256–1269.
  12. [12] J. Rodriguez, J.S. Lai, F.Z. Peng, et al., Multilevel invert-ers: survey of topologies, controls, and applications, IEEETransactions on Industry Applications, 49, 2002, 724–738.
  13. [13] D.G. Holmes and T.A. Lipo, Pulse width modulation for powerconverters – principles and practices, IEEE press series (NewYork, NY: John Wiley & Sons, Inc., 2003), 118.
  14. [14] T. Wanjekeche, A.A. Jimoh, and D.V. Nicolae, A novel multi-level 9-level inverter based on 3-level NPC/H-Bridge topologyfor photovoltaic application, International Review of ElectricalEngineering, 4(5), 2009, 769–777.
  15. [15] Z. Jinghua and L. Zhengxi, Research on hybrid modulationstrategies based on general hybrid topology of multilevel in-verter, Int. Symp. on Power Electronics and Electric Drives,Automation and Motion (SPEEDAM), 2008, 784–788.
  16. [16] F.Z. Peng, A generalized multilevel inverter topology with selfvoltage balancing, IEEE Transactions on Industry Applica-tions, 2001, 611–618.
  17. [17] Y. Chen, B. Mwinyiwiwa, Z. Wolanski, and B.T. Ooi, Reg-ulating and equalizing dc capacitance voltages in multilevelSTATCOM, IEEE Transactions on Power Development, 12(2),1997, 901–907.
  18. [18] T. Wanjekeche, Design and analysis of sinusoidal pulse withmodulation techniques for voltage source inverter in UPS appli-cation, M. Eng. thesis, Department of Electrical Engineering,Harbin Institute of Technology, Shenzhen Graduate School,China, 2006.
  19. [19] T. Ishida, T. Miyamoto, T. Oota, K. Matsuse, K. Sasagawa,and L. Huang, A control strategy for a five-level doubleconverter with adjustable DC link voltage, Proc. IEEE IndustryApplications Society Conf., 1, 2002, 530–536.

Important Links:

Go Back