PROPORTIONAL–INTEGRAL–DERIVATIVE CONTROLLER FOR ARMED MANIPULATOR ROBOTS, 170-180.

Alaeddin Malek and Farideh Giv

References

  1. [1] A. Bayram and A S. Duru, Design and control of arehabilitation robot manipulator for head-neck orthopaedicdisorders, International Journal of Robotics and Automation,37(6), 2022, 486–497.
  2. [2] E. Lyu, X. Yang, W. Liu, J. Wang, S. Song, and M. Q.-H.Meng, An autonomous eye-in-hand robotic system for pickingobjects in a supermarket environment with non-holonomicconstraint, International Journal of Robotics and Automation,37(4), 2022.
  3. [3] L.A Nguyen, T.D Ngo, T.D Pham and X.T. Truong, An efficientnavigation system for autonomous mobile robots in dynamicsocial environments, International Journal of Robotics andAutomation, 37(1) 2022, 97–106.
  4. [4] A. Malek, L. Jafarian-Khaled Abad, and S. Khodayari-Samghabadi, Semi-infinite programming to solve armedrobot trajectory problem using recurrent neural network,International Journal of Robotics and Automation, 30(2), 2015,113–118.
  5. [5] G. Zhong, C. Wang, and W. Dou, Fuzzy adaptive PID fastterminal sliding mode controller for redundant manipulator,Mechanical Systems and Signal Processing 159, 2021, 107577
  6. [6] H.R. Nohooji, Constrained neural adaptive PID control forrobot manipulators, Journal of the Franklin Institute, 357(7),2020, 3907–3923.
  7. [7] I. Gandarilla, V. Santibanez, J. Sandoval, and J G. Romero,PID passivity-based control laws for joint position regulationof a self-balancing robot, Control Engineering Practice, 116,2021, 104927
  8. [8] X. Zhang, H. Li, G. Li, T. Chen, and J. Shan, Continuous PID-SMC based on improved EHGO for robot manipulators withlimited state measurements, Journal of the Franklin Institute,357, 2020, 10648–10668.
  9. [9] P.N. Paraskevopoulos, Modern control engineering, BocaRaton, FL: CRC Press, 2001
  10. [10] B.A. Francis and W.M. Wonham, The internal model principleof control theory, Automatica, 12, 1976, 457–465.
  11. [11] B Zhu, L Wang, J Wu, and Q Li, Optimization design andperformance comparison of two 5-DOF parallel manipulatorsused for loading device, International Journal of Robotics andAutomation, 37(4), 2022
  12. [12] M.W. Spong, S. Hutchinson, and M. Vidyassagar, Robotmodeling and control, Hoboken, NJ: Wiley, 2006
  13. [13] A. Gallant and C. Gosselin, Extending the capabilities of roboticmanipulators using trajectory optimization, Mechanism andMachine Theory, 121, 2018, 502–514.
  14. [14] J. Angeles, Fundamentals of robotics mechanical system, Cham:Springer, 2014
  15. [15] T. Bajd, M. Mihelj, J. Lenarcic, A. Stanovnik, and M. Munih,Robotics, Berlin: Springer Verlag, 2010
  16. [16] Z. Qi, Z. Dan, Z. Shuo, L. Xueling, and H. Guanyu, Structuraldesign and kinematic analysis of a group of translationalparallel mechanisms, International Journal of Robotics andAutomation, 37(4), 2022, 382–390.

Important Links:

Go Back