VIBRATION-BASED STRUCTURAL DAMAGE IDENTIFICATION: A REVIEW

Jian-Yu Yang, Bin-Hua Xia, Zengshun Chen, Tian-Long Li, and Renming Liu

References

  1. [1] Z.-S. Chen, C. Zhang, X. Wang, and C.-M. Ma, Wind tunnel measurements for flutter of a long-afterbody bridge deck, Sensors, 17(2), 2017, 335.
  2. [2] Z.-S. Chen, J.-t. Zhou, G. Hu, Y. Li, H. Ma, and G.-w. Yao, A novel movable scaffolding system (MSS) for a long-span curved girder bridge, International Journal of Robotics and Automation, 32(2), 2017, 164.
  3. [3] A. Nair and C. Cai, Acoustic emission monitoring of bridges: Review and case studies, Engineering Structures, 32(6), 2010, 1704–1714.
  4. [4] B. Ray, S. Hasan, and D. Clegg, Evaluation of defects in FRP composites by NDT techniques, Journal of Reinforced Plastics and Composites, 26(12), 2007, 1187–1192.
  5. [5] Z. Wang, K. Yao, B. Deng, and K. Ding, Theoretical studies of metal magnetic memory technique on magnetic flux leakage signals, NDT and E International, 43(4), 2010, 354–359.
  6. [6] D. McCann and M. Forde, Review of NDT methods in the assessment of concrete and masonry structures, NDT and E International, 34(2), 2001, 71–84.
  7. [7] Y. Wang, D.P. Thambiratnam, T.H. Chan, and A. Nguyen, Method development of damage detection in asymmetric buildings, Journal of Sound and Vibration, 413, 2018, 41–56.
  8. [8] Z. Chen, X. Zhou, X. Wang, L. Dong, and Y. Qian, Deployment of a smart structural health monitoring system for long-span arch bridges: A review and a case study, Sensors, 17(9), 2017, 2151.
  9. [9] V.G.M. Annamdas, S. Bhalla, and C.K. Soh, Applications of structural health monitoring technology in Asia, Structural Health Monitoring, 16(3), 2017, 324–346.
  10. [10] D. Feng and M.Q. Feng, Computer vision for SHM of civil infrastructure: From dynamic response measurement to damage detection – A review, Engineering Structures, 156, 2018, 105–117.
  11. [11] C.A. Tokognon, B. Gao, G.Y. Tian, and Y. Yan, Structural health monitoring framework based on Internet of Things: A survey, IEEE Internet of Things Journal, 4(3), 2017, 619–635.
  12. [12] Y. Wang, D.P. Thambiratnam, T. Chan, and A. Nguyen, Damage detection in asymmetric buildings using vibration-based techniques, Structural Control and Health Monitoring, 25(5), 2018, e2148.
  13. [13] J.-P. Tang, D.-J. Chiou, C.-W. Chen et al., RETRACTED: A case study of damage detection in benchmark buildings using a Hilbert-Huang Transform-based method, Journal of Vibration and Control, 17(4), 2011, 623–636.
  14. [14] M.I. Todorovska and M.D. Trifunac, Earthquake damage detection in the Imperial County Services Building I: The data and time–frequency analysis, Soil Dynamics and Earthquake Engineering, 27(6), 2007, 564–576.
  15. [15] J.J. Lee, J.W. Lee, J.H. Yi, C.B. Yun, and H.Y. Jung, Neural networks-based damage detection for bridges considering errors in baseline finite element models, Journal of Sound and Vibration, 280(3–5), 2005, 555–578.
  16. [16] F. Magalh˜aes, A. Cunha, and E. Caetano, Vibration based structural health monitoring of an arch bridge: From automated OMA to damage detection, Mechanical Systems and Signal Processing, 28, 2012, 212–228.
  17. [17] C.C. Ciang, J.-R. Lee, and H.-J. Bang, Structural health monitoring for a wind turbine system: A review of damage detection methods, Measurement Science and Technology, 19(12), 2008, 122001.
  18. [18] A. Ghoshal, M.J. Sundaresan, M.J. Schulz, and P.F. Pai, Structural health monitoring techniques for wind turbine blades, Journal of Wind Engineering and Industrial Aerodynamics, 85(3), 2000, 309–324.
  19. [19] B. Gao, Y. He, W.L. Woo, G.Y. Tian, J. Liu, and Y. Hu, Multidimensional tensor-based inductive thermography with multiple physical fields for offshore wind turbine gear inspection, IEEE Transactions on Industrial Electronics, 63(10), 2016, 6305–6315.
  20. [20] R. Adams, D. Walton, J. Flitcroft, and D. Short, Vibration testing as a nondestructive test tool for composite materials, Composite Reliability (West Conshohocken, PA, USA: ASTM International, 1975).
  21. [21] P. Cawley and R.D. Adams, The location of defects in structures from measurements of natural frequencies, The Journal of Strain Analysis for Engineering Design, 14(2), 1979, 49–57.
  22. [22] Y.-S. Lee and M.-J. Chung, A study on crack detection using eigenfrequency test data, Computers and Structures, 77(3), 2000, 327–342.
  23. [23] P. Rizos, N. Aspragathos, and A. Dimarogonas, Identification of crack location and magnitude in a cantilever beam from the vibration modes, Journal of Sound and Vibration, 138(3), 1990, 381–388.
  24. [24] J.-T. Kim, Y.-S. Ryu, H.-M. Cho, and N. Stubbs, Damage identification in beam-type structures: frequency-based method vs mode-shape-based method, Engineering Structures, 25(1), 2003, 57–67.
  25. [25] O. Salawu, Detection of structural damage through changes in frequency: A review, Engineering Structures, 19(9), 1997, 718–723.
  26. [26] A. Pandey and M. Biswas, Damage detection in structures using changes in flexibility, Journal of Sound and Vibration, 169(1), 1994, 3–17.
  27. [27] T.K. O’Brien and K.L. Reifsnider, Fatigue damage evaluation through stiffness measurements in boron-epoxy laminates, Journal of composite materials, 15(1), 1981, 55–70.
  28. [28] N. Stubbs, J.-T. Kim, and C. Farrar, Field verification of a nondestructive damage localization and severity estimation algorithm, Proc. SPIE the International Society for Optical Engineering, Bellingham, USA, 1995, 210. 129
  29. [29] C.R. Farrar, W. Baker, T. Bell et al., Dynamic Characterization and Damage Detection in the I-40 Bridge Over the Rio Grande, Los Alamos National Lab., NM (United States), 1994.
  30. [30] A. Pandey, M. Biswas, and M. Samman, Damage detection from changes in curvature mode shapes, Journal of Sound and Vibration, 145(2), 1991, 321–332.
  31. [31] W.M. West, Illustration of the use of modal assurance criterion to detect structural changes in an orbiter test specimen, 4th International Modal Analysis Conference, Los Angeles, CA, Feb. 3–6, 1986, 1–6.
  32. [32] R.J. Allemang and D.L. Brown, A correlation coefficient for modal vector analysis, Proc. 1st International Modal Analysis Conf., Vol. 1, SEM, Orlando, 1982, 110–116.
  33. [33] R.J. Allemang, The modal assurance criterion–twenty years of use and abuse, Sound and Vibration, 37(8), 2003, 14–23.
  34. [34] Z. Shi, S. Law, and L. Zhang, Structural damage localization from modal strain energy change, Journal of Sound and Vibration, 218(5), 1998, 825–844.
  35. [35] Z. Shi, S. Law, and L.M. Zhang, Structural damage detection from modal strain energy change, Journal of Engineering Mechanics, 126(12), 2000, 1216–1223.
  36. [36] Z. Shi, S. Law, and L. Zhang, Improved damage quantification from elemental modal strain energy change, Journal of Engineering Mechanics, 128(5), 2002, 521–529.
  37. [37] Y. Aoki and O.-I. Byon, Damage detection of CFRP pipes and shells by using localized flexibility method, Advanced Composite Materials, 10(2–3), 2001, 189–198.
  38. [38] C.R. Farrar and D. Jauregui, Damage Detection Algorithms Applied to Experimental and Numerical Modal Data from the I-40 Bridge, Los Alamos National Laboratory, Los Alamos, NM, USA, 1996.
  39. [39] M.-B. Abdo and M. Hori, A numerical study of structural damage detection using changes in the rotation of mode shapes, Journal of Sound and Vibration, 251(2), 2002, 227–239.
  40. [40] C. Modena, D. Sonda, and D. Zonta, Damage localization in reinforced concrete structures by using damping measurements, Key Engineering Materials, 167, 1999, 132–141.
  41. [41] R. Curadelli, J. Riera, D. Ambrosini, and M. Amani, Damage detection by means of structural damping identification, Engineering Structures, 30(12), 2008, 3497–3504.
  42. [42] H. Salane and J. Baldwin Jr, Identification of modal properties of bridges, Journal of Structural Engineering, 116(7), 1990, 2008–2021.
  43. [43] C.R. Farrar and D.A. Jauregui, Comparative study of damage identification algorithms applied to a bridge: I. Experiment, Smart Materials and Structures, 7(5), 1998, 704.
  44. [44] C.R. Farrar and D.A. Jauregui, Comparative study of damage identification algorithms applied to a bridge: II. Numerical study, Smart Materials and Structures, 7(5), 1998, 720.
  45. [45] N.-G. Park and Y.-s. Park, Identification of damage on a substructure with measured frequency response functions, Journal of Mechanical Science and Technology, 19(10), 2005, 1891.
  46. [46] A. Furukawa, H. Otsuka, and J. Kiyono, Structural damage detection method using uncertain frequency response functions, Computer – Aided Civil and Infrastructure Engineering, 21(4), 2006, 292–305.
  47. [47] A. Berman and E. Nagy, Improvement of a large analytical model using test data, AIAA Journal, 21(8), 1983, 1168–1173.
  48. [48] B. Gao, P. Lu, W.L. Woo, G.Y. Tian, Y. Zhu, and M. Johnston, Variational Bayesian subgroup adaptive sparse component extraction for diagnostic imaging system, IEEE Transactions on Industrial Electronics, 65(10), 2018, 8142–8152.
  49. [49] H. Sohn and K.H. Law, A Bayesian probabilistic approach for structure damage detection, Earthquake Engineering and Structural Dynamics, 26(12), 1997, 1259–1281.
  50. [50] H. Sohn and K.H. Law, Bayesian probabilistic damage detection of a reinforced – bridge column, Earthquake Engineering and Structural Dynamics, 29(8), 2000, 1131–1152.
  51. [51] J.L. Beck and L.S. Katafygiotis, Updating models and their uncertainties. I: Bayesian statistical framework, Journal of Engineering Mechanics, 124(4), 1998, 455–461.
  52. [52] M.W. Vanik, J.L. Beck, and S. Au, Bayesian probabilistic approach to structural health monitoring, Journal of Engineering Mechanics, 126(7), 2000, 738–745.
  53. [53] H. Ebrahimian, R. Astroza, J.P. Conte, and R.A. de Callafon, Nonlinear finite element model updating for damage identification of civil structures using batch Bayesian estimation, Mechanical Systems and Signal Processing, 84, 2017, 194–222.
  54. [54] R. Astroza, H. Ebrahimian, Y. Li, and J.P. Conte, Bayesian nonlinear structural FE model and seismic input identification for damage assessment of civil structures, Mechanical Systems and Signal Processing, 93, 2017, 661–687.
  55. [55] J. Ricles and J. Kosmatka, Damage detection in elastic structures using vibratory residual forces and weighted sensitivity, AIAA Journal, 30(9), 1992, 2310–2316.
  56. [56] P.-L. Liu, Identification and damage detection of trusses using modal data, Journal of Structural Engineering, 121(4), 1995, 599–608.
  57. [57] L. Papadopoulos and E. Garcia, Structural damage identification: A probabilistic approach, AIAA Journal, 36(11), 1998, 2137–2145.
  58. [58] A. Messina, E. Williams, and T. Contursi, Structural damage detection by a sensitivity and statistical-based method, Journal of Sound and Vibration, 216(5), 1998, 791–808.
  59. [59] W. Wang and P. McFadden, Application of orthogonal wavelets to early gear damage detection, Mechanical Systems and Signal Processing, 9(5), 1995, 497–507.
  60. [60] Y. Yan and L. Yam, Online detection of crack damage in composite plates using embedded piezoelectric actuators/sensors and wavelet analysis, Composite Structures, 58(1), 2002, 29–38.
  61. [61] H. Kim and H. Melhem, Fourier and wavelet analyses for fatigue assessment of concrete beams, Experimental Mechanics, 43(2), 2003, 131–140.
  62. [62] A. Ovanesova and L. Suarez, Applications of wavelet transforms to damage detection in frame structures, Engineering Structures, 26(1), 2004, 39–49.
  63. [63] S. Law, X. Li, X. Zhu, and S. Chan, Structural damage detection from wavelet packet sensitivity, Engineering Structures, 27(9), 2005, 1339–1348.
  64. [64] W. Xu, M. Cao, W. Ostachowicz, M. Radzie´nski, and N. Xia, Two-dimensional curvature mode shape method based on wavelets and Teager energy for damage detection in plates, Journal of Sound and Vibration, 347, 2015, 266–278.
  65. [65] A. Tabrizi, L. Garibaldi, A. Fasana, and S. Marchesiello, Early damage detection of roller bearings using wavelet packet decomposition, ensemble empirical mode decomposition and support vector machine, Meccanica, 50(3), 2015, 865–874.
  66. [66] C. Yang and S.O. Oyadiji, Damage detection using modal frequency curve and squared residual wavelet coefficients-based damage indicator, Mechanical Systems and Signal Processing, 83, 2017, 385–405.
  67. [67] X. Wu, J. Ghaboussi, and J.H. Garrett, Use of neural networks in detection of structural damage, Computers and Structures, 42(4), 1992, 649–659.
  68. [68] S.A. Ramu and V.T. Johnson, Damage assessment of composite structures—A fuzzy-logic integrated neural-network approach, Computers and Structures, 57(3), 1995, 491–502.
  69. [69] M. Nakamura, S.F. Masri, A.G. Chassiakos, and T.K. Caughey, A method for non-parametric damage detection through the use of neural networks, Earthquake Engineering and Structural Dynamics, 27(9), 1998, 997–1010.
  70. [70] J.H. Holland, Adaptation in natural and artificial systems: An introductory analysis with applications to biology, control, and artificial intelligence, MIT press, MA, USA, 1992.
  71. [71] J.-H. Chou and J. Ghaboussi, Genetic algorithm in structural damage detection, Computers and Structures, 79(14), 2001, 1335–1353.
  72. [72] H. Hao and Y. Xia, Vibration-based damage detection of structures by genetic algorithm, Journal of Computing in Civil Engineering, 16(3), 2002, 222–229.
  73. [73] F. Au, Y. Cheng, L. Tham, and Z. Bai, Structural damage detection based on a micro-genetic algorithm using incomplete and noisy modal test data, Journal of Sound and Vibration, 259(5), 2003, 1081–1094.
  74. [74] M. Nobahari and S. Seyedpoor, Structural damage detection using an efficient correlation-based index and a modified genetic algorithm, Mathematical and Computer Modelling, 53(9–10), 2011, 1798–1809.
  75. [75] H. Gomes and N. Silva, Some comparisons for damage detection on structures using genetic algorithms and modal sensitivity 130 method, Applied Mathematical Modelling, 32(11), 2008, 2216– 2232.
  76. [76] S.-Y. Lee and G.-D. Kim, Micromechanical damage identification of vibrating laminated composites using bivariate Gaussian function-based genetic algorithms, Journal of Composite Materials, 2018, 0021998318754997.
  77. [77] T. Nishikawa, J. Yoshida, T. Sugiyama, and Y. Fujino, Concrete crack detection by multiple sequential image filtering, Computer – Aided Civil and Infrastructure Engineering, 27(1), 2012, 29–47.
  78. [78] R. Adhikari, O. Moselhi, and A. Bagchi, Image-based retrieval of concrete crack properties for bridge inspection, Automation in Construction, 39, 2014, 180–194.
  79. [79] H. Mitomi, J. Saita, M. Matsuoka, and F. Yamazaki, Automated damage detection of buildings from aerial television images of the 2001 Gujarat, India earthquake, Geoscience and Remote Sensing Symposium, 2001. IGARSS’01, IEEE 2001 International, Vol. 1, IEEE, Sydney, NSW, Australia, 2001, 147–149.
  80. [80] Y.J. Cha, W. Choi, and O. B¨uy¨uk¨ozt¨urk, Deep learning-based crack damage detection using convolutional neural networks, Computer – Aided Civil and Infrastructure Engineering, 32(5), 2017, 361–378.
  81. [81] Y.J. Cha, W. Choi, G. Suh, S. Mahmoudkhani, and O. B¨uy¨uk¨ozt¨urk, Autonomous structural visual inspection using region-based deep learning for detecting multiple damage types, Computer – Aided Civil and Infrastructure Engineering, 33(9), 2018, 731–747.
  82. [82] Y.z. Lin, Z.h. Nie, and H.w. Ma, Structural damage detection with automatic feature-extraction through deep learning, Computer – Aided Civil and Infrastructure Engineering, 32(12), 2017, 1025–1046.

Important Links:

Go Back