ANALYTICAL C3 CONTINUOUS TOOL PATH SMOOTHING ALGORITHM FOR ROBOTIC MACHINING CONSIDERING THE REDUNDANT ANGLE, 1-15.

Qin Hu, Runqi Yang, Xu Zhang, and Liang Huang

References

  1. [1] W. Ji and L. Wang, Industrial robotic machining: A review,International Journal of Advanced Manufacturing Technology,103(1–4), 2019, 1239–1255.
  2. [2] X. Zeng, G Zhu, Z Gao, R Ji, J Ansari, and C Lu, Surfacepolishing by industrial robots: A review, The InternationalJournal of Advanced Manufacturing Technology, 125(9–10),2023, 3981–4012.
  3. [3] S.H. Kim, E. Nam, T.I. Ha, S.H. Hwang, J.H. Lee, S.H.Park, AND B.K. Min, Robotic machining: A review of recentprogress, International Journal of Precision Engineering andManufacturing, 20(9), 2019, 1629–1642.
  4. [4] Y. Yuan, K. Yu, C. Zhang, Q. Chen, and W. Yang, Generationof textured surfaces by vibration-assisted ball-end milling,Nanomanufacturing and Metrology, 1(6) , 2023, 19.
  5. [5] J. Zhao, X. Luo, and Y. Li, A novel robot path planningalgorithm based on the improved wild horse optimiser withhybrid strategies, International Journal of Robotics andAutomation, 39(6), 2024, 515–533.
  6. [6] Y. Sun, J. Jinjie, X. Jinting, C. Mansen, and N. Jinbo,Path, feedrate and trajectory planning for free-form surfacemachining: A state-of-the-art review, Chinese Journal ofAeronautics, 35(8), 2022, 12–29.
  7. [7] Y. Ding, Y. Wang, and B. Chen, Smooth and proximatetime-optimal trajectory planning of robotic manipulators,Transactions of the Canadian Society for MechanicalEngineering, 46(2), 2022, 466–476.
  8. [8] L. Lu, L. Zhang, C. Fan, and H. Wang, High-orderjoint-smooth trajectory planning method considering tool-orientation constraints and singularity avoidance for robotsurface machining, Journal of Manufacturing Processes, 80,2022, 789–804.
  9. [9] H. Sun, J. Yang, and H. Ding, A novel tool pathsmoothing algorithm of 6R manipulator considering pose-dependent dynamics by designing asymmetrical fir filters,Robotics and Computer-Integrated Manufacturing, 86, 2024,102681.
  10. [10] Z. He, X. Tang, Q. Shen, C. Duan, and C. Jia, Optimisationof a six-degree-of-freedom robot trajectory based on improvedmulti-objective pso algorithm, International Journal ofRobotics and Automation, 38(3), 2023, 218–230.
  11. [11] Y.A. Liu, M. Wan, X.B. Qin, Q.B. Xiao, and W.H. Zhang, Firfilter-based continuous interpolation of g01 commands withbounded axial and tangential kinematics in industrial five-axismachine tools, International Journal of Mechanical Sciences,169(0), 2020, 105325.
  12. [12] L. Hua, Y. Zhao, J. Zhou, Y. Zhang, N. Huang, and L. Zhu,Five-axis toolpath interpolation method with kinematic cornersmoothing and time synchronization, Journal of ManufacturingProcesses, 105, 2023, 338–358.
  13. [13] C. Li, Y. Chao, S. Chen, J. Li, and Y. Yuan, Time-optimaltrajectory generation for industrial robots based on elitemutation sparrow search algorithm, International Journal ofRobotics and Automation, 38(2), 2023, 126–135.
  14. [14] L. Hua, N. Huang, B. Yi, Y. Zhao, and L. Zhu, Globaltoolpath smoothing for CNC machining based on B-spline approximation with tool tip position adjustment, TheInternational Journal of Advanced Manufacturing Technology,125(7–8),2023, 3651–3665.
  15. [15] Q. Xiao, M. Wan, X.B. Qin, Y. Liu, and W.H. Zhang, Real-time smoothing of G01 commands for five-axis machining byconstructing an entire spline with the bounded smoothingerror, Mechanism and Machine Theory, 161, 2021, 104307.
  16. [16] Q. Xiao, M. Wan, Y. Liu, X.B. Qin, and W.H. Zhang,Space corner smoothing of CNC machine tools throughdeveloping 3D general clothoid, Robotics and Computer-Integrated Manufacturing, 64, 2020, 101949.
  17. [17] H. Sun, J. Yang, D. Li, and H. Ding, An on-line tool pathsmoothing algorithm for 6R robot manipulator with geometricand dynamic constraints, Science China Technological Sciences,64(9), 2021, 1907–1919.
  18. [18] J. Peng, P. Huang, Y. Ding, and H. Ding, An analytical methodfor decoupled local smoothing of linear paths in industrialrobots, Robotics and Computer-Integrated Manufacturing, 72,2021, 102193.
  19. [19] H. Xie, Q. Wang, S.K Ong, A.Y.C. Nee, X. Zhou, and Z. Liao,Automatic generation of interference-free and posture-smoothtoolpath for robotic belt grinding of complex workpieces,IEEE/ASME Transactions On Mechatronics, 28(1), 2023,518–530.
  20. [20] J. Peng, Y. Ding, G. Zhang, and H. Ding, Smoothness-orientedpath optimization for robotic milling processes, Science ChinaTechnological Sciences, 63(9), 2020, 1751–1763.
  21. [21] N. Huang, L. Hua, X. Huang, Y. Zhang, L. Zhu, and D.Biermann, B-spline-based corner smoothing method to decreasethe maximum curvature of the transition curve, Journal ofManufacturing Science and Engineering, Transactions of theASME, 144(5), 2022, 054503.
  22. [22] X. Liu, Y. Xu, J. Cao, J. Liu, and Y. Zhao, A high-precisionplanar NURBS interpolation system based on segmentationmethod for industrial robot, Applied Sciences, 13(24), 2023,13210.
  23. [23] W. Ma, T. Hu, C. Zhang, and T. Zhang, A robot motionposition and posture control method for freeform surfacelaser treatment based on NURBS interpolation, Robotics andComputer-Integrated Manufacturing, 83, 2023, 102547.
  24. [24] B. Sencer and E. Shamoto, Curvature-continuous sharp cornersmoothing scheme for cartesian motion systems, in Proceeding1313th IEEE International Workshop On Advanced MotionControl (AMC), Yokohama, 2014, 6.
  25. [25] B. Sencer, K. Ishizaki, and E. Shamoto, A curvature optimalsharp corner smoothing algorithm for high-speed feed motiongeneration of nc systems along linear tool paths, TheInternational Journal of Advanced Manufacturing Technology,76(9–12), 2015, 1977–1992.
  26. [26] J. Yang, Q. Qi, A. Adili, and H. Ding, An analytical toolpath smoothing algorithm for robotic machining with theconsideration of redundant kinematics, Robotics and Computer-Integrated Manufacturing, 89, 2024, 102768.
  27. [27] M. Wan, X.B. Qin, Q.B. Xiao, Y. Liu, and W.H. Zhang,Asymmetrical Pythagorean–hodograph (PH) spline-based C3continuous corner smoothing algorithm for five-axis tool pathswith short segments, Journal of Manufacturing Processes, 64,2021, 1387–1411
  28. [28] Q. Hu, Y. Chen, X. Jin, and J. Yang, A real-time C3continuous local corner smoothing and interpolation algorithmfor CNC machine tools, Journal of Manufacturing Science andEngineering-Transactions of the Asme, 141(4), 2019, 41004.
  29. [29] R.T. Farouki, J. Manjunathaiah, and G. Yuan, G codes for thespecification of Pythagorean–hodograph tool paths and asso-ciated feedrate functions on open-architecture CNC machines,International Journal of Machine Tools & Manufacture, 39(1),1999, 123–142.
  30. [30] D.J. Walton and D.S. Meek, G 2 blends of linear segments withcubics and Pythagorean–hodograph quintics, InternationalJournal of Computer Mathematics, 86(9), 2009, 1498–1511.
  31. [31] R.T. Farouki, C. Giannelli, and A. Sestini, New developmentsin theory, algorithms, and applications for Pythagorean–hodograph curves, Springer INdAM Series, 35, 2019,127–177.
  32. [32] R. Ait-Haddou and M. Mazure, Sparse Pythagorean-hodographcurves, Computer Aided Geometric Design, 55, 2017, 84–103.
  33. [33] Q. Hu, Y. Chen, X. Jin, and J. Yang, A real-time C3 continuoustool path smoothing and interpolation algorithm for five-axis machine tools, Journal of Manufacturing Science andEngineering, 142(4), 2020, 1–43.
  34. [34] K. Wu, J. Li, H. Zhao, and Y. Zhong, Review of industrialrobot stiffness identification and modelling, Applied Sciences,12(17), 2022, 8719.
  35. [35] L. Xu, W. Mao, L. Zhu, J. Xu, and Y. Sun, Tool orientationand redundancy integrated planning method constrained bystiffness for robotic machining of freeform surfaces, TheInternational Journal of Advanced Manufacturing Technology,121(11–12), 2022, 8313–8327.
  36. [36] Y. Ma, Y. Fu, Y. Tian, and X. Liu, Semi-analytical stiffnessmodel of bolted joints in machine tools considering the couplingeffect, Nanomanufacturing and Metrology, 6(1), 2023, 17.
  37. [37] X. Zhang, H. Wang, Y. Rong, J. Niu, J. Tian, and Y. Ning,Kinematics and stiffness analysis of a novel 4-DOF over-constrained parallel mechanism with three legs, InternationalJournal of Robotics and Automation, 38(6), 2023, 450–460.
  38. [38] N. Yan, G. Chen, J. Wu, and G. Jin, Trajectory trackingand compensation control of redundant manipulator based onintegrated controller, International Journal of Robotics andAutomation, 37(4), 2022, 362–371.
  39. [39] S. Zhao, Z. Zhu, C. Chen, Y. Du, X. Song, K. Yan, D. Jiang,L. Li, and A. Liu,Trajectory planning of redundant spacemanipulators for multi-tasks, International Journal of Roboticsand Automation, 38(5), 2023, 344–351.
  40. [40] S. Tulsyan, Local toolpath smoothing for five-axis machinetools, International Journal of Machine Tools and Manufac-ture: Design, Research and Application, 96, 2015, 15–26.

Important Links:

Go Back