Baochen Wei,∗ Yi Yue,∗∗,∗∗∗ Xianchao Zhao,∗ Yanbiao Li,∗∗∗∗ and Chenkun Qi∗


  1. [1] Ivo J. Tiemessen, Carel T. J. Hulshof, and Monique H.W. Frings-Dresen, An overview of strategies to reduce wholebody vibration exposure on drivers: A systematic review, International Journal of Industrial Ergonomics, 37(3), 2007, 245–256.
  2. [2] C. Wei, Research on kinetics of the image stabilization system in space telescope, Doctoral Dissertation, University of Chinese Academy of Sciences, Beijing, 2016.
  3. [3] W. Sun, H. Gao, and O. Kaynak, Vibration isolation for active suspensions with performance constraints and actuator saturation, IEEE/ASME Transactions on Mechatronics, 20, 2015, 675–683.
  4. [4] J. Liu, Y. Li, Y. Zhang, Q. Gao, and B. Zuo, Dynamics and control of a parallel mechanism for active vibration isolation in space station, Nonlinear Dynamics, 76, 2014, 1737–1751.
  5. [5] D.R. Leyshon and C.W. Stammers, The development and performance of an ambulance stretcher suspension, Proceedings of the Institution of Mechanical Engineers, Part D: Transport Engineering, 200(4), 1986, 249–257.
  6. [6] T. Liu, P. Rajaguru, G. Dieck, et al., SU-E-T-349: Variation in VMAT QA pass rate caused by detector setup errors, Medical Physics, 39, 2012, 3784–3784.
  7. [7] K. Pandurangan, H.K.V. Venna, and V. Banthia, Reduction of vibration transmissibility to driver’s seat of truck, SAE Technical Paper, 2016.
  8. [8] D. Ning, S. Sun, H. Li, H. Du, and W. Li, Active control of an innovative seat suspension system with acceleration measurement based friction estimation, Journal of Sound and Vibration, 384, 2016, 28–44.
  9. [9] D. Ning, S. Sun, L. Wei, B. Zhang, H. Du, and W. Li, Vibration reduction of seat suspension using observer based terminal sliding mode control with acceleration data fusion, Mechatronics, 44, 2017, 71–83.
  10. [10] A. Alfadhli, J. Darling, and A.J. Hillis, The control of an active seat with vehicle suspension preview information, Journal of Vibration and Control, 24, 2018, 1412–1426.
  11. [11] J-P. Merlet, Parallel robots (Berlin: Springer Science & Business Media, 2006).
  12. [12] D. Wang, L. Wang, J. Wu, et al., An experimental study on the dynamics calibration of a 3-DOF parallel tool head, IEEE/ASME Transactions on Mechatronics, 24(6), 2019, 2931–2941.
  13. [13] Z. Huang and Q. Li, General methodology for type synthesis of symmetrical lower-mobility parallel manipulators and several novel manipulators, The International Journal of Robotics Research, 21, 2002, 131–145.
  14. [14] Z. Huang and Q. Li, Type synthesis of symmetrical lowermobility parallel mechanisms using the constraint-synthesis method, The International Journal of Robotics Research, 22, 2003, 59–79.
  15. [15] X. Kong and C. Gosselin, Type synthesis of parallel mechanisms (Berlin: Springer, 2007).
  16. [16] L-W. Tsai and S. Joshi, Kinematics and optimization of a spatial 3-UPU parallel manipulator, Journal of Mechanical Design, 122, 2000, 439–446.
  17. [17] Q. Li, X. Chai, and Q. Chen, Review on 2R1T 3-DOF parallel mechanisms, Science China Press, 62, 2017, 1507–1519.
  18. [18] G. Takács and B. Roha-Ilkiv, Model predictive vibration control: efficient constrained MPC vibration control for lightly damped mechanical structures (Berlin: Springer Science & Business Media, 2012).
  19. [19] X. Wang, F. Bi, and H. Du, Reduction of low frequency vibration of truck driver and seating system through system parameter identification, sensitivity analysis and active control, Mechanical Systems and Signal Processing, 105, 2018, 16–35.
  20. [20] I. Maciejewski, S. Glowinski, and T. Krzyzynski, Active control of a seat suspension with the system adaptation to varying load mass, Mechatronics, 24, 2014, 1242–1253.
  21. [21] D. Ning, S. Sun, and F. Zhang, Disturbance observer based Takagi–Sugeno fuzzy control for an active seat suspension, Mechanical Systems and Signal Processing, 93, 2017, 515–530. 190
  22. [22] R. Wang, H. Jing, and H.R. Karimi, Robust fault-tolerant H∞ control of active suspension systems with finite-frequency constraint, Mechanical Systems and Signal Processing, 62, 2015, 341–355.
  23. [23] R. Wang, H. Jing, and F. Yan, Optimization and finitefrequency H∞ control of active suspensions in in-wheel motor driven electric ground vehicles, Journal of the Franklin Institute, 352, 2015, 468–484.
  24. [24] S.B. Choi, J.H. Choi, Y.S. Lee, and M.S. Han, Vibration control of an ER seat suspension for a commercial vehicle, Journal of Dynamic Systems, Measurement, and Control, 125(1), 2003, 60–68.
  25. [25] S.B. Choi, and Y.M. Han, Vibration control of electrorheological seat suspension with human-body model using sliding mode control, Journal of Sound and Vibration, 303(1), 2007, 391–404.
  26. [26] D.X. Phu, S.B. Choi, Y.S. Lee, et al., Vibration control of a vehicle’s seat suspension featuring a magnetorheological damper based on a new adaptive fuzzy sliding-mode controller, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 230(4), 2016, 437–458.

Important Links:

Go Back