ASSEMBLY AUTOMATION – AN EFFICIENT APPROACH TO FIND OPTIMAL PARAMETERS FOR PART FEEDERS

M. Suresh,∗ Neena K. Mathew,∗ S.P. Rohith,∗ R. Aishwarya,∗ and K. Ramanathan∗

References

  1. [1] M. Suresh, K.A. Jagadeesh, and P. Ashoka Varthanan, Determining the natural resting orientation of a part using drop test and theoretical methods, Journal of Manufacturing Systems, 32(1), 2013, 220–227. DOI: 10.1016/j.jmsy.2012.07.003
  2. [2] A. Mankame, P. Datseris, M. Jouaneh, M.S. Sodhi, Analytical investigation of the capturing process in the orientation and stacking of parts based on internal features, International Journal of Robotics and Automation, 17(2), 2002, 75–85.
  3. [3] G. Le, V. Nguyen, A. Dang, and V. Nguyen, A method to design vibratory bowl feeder by using numerical simulation analysis, International Journal of Scientific Engineering and Science, 2(9), 2018, 26–30. DOI: 10.15625/2525-2518/57/1/12859
  4. [4] D. Reznik, J. Canny, and K. Goldberg, Analysis of part motion on a longitudinally vibrating plate, Proceedings of the 1997 IEEE/RSJ International Conference on Intelligent Robot and Systems, 1, 1997, 421–427. DOI: 10.1109/IROS.1997.649098
  5. [5] M. Suresh, K.A. Jagadeesh, and R. Rathis, Experimental investigation and dynamic simulation for singularising unit in part feeders, Journal of Engineering Science and Technology, 10(6), 2015, 771–779.
  6. [6] Z. Shao, H. Li, L. Wang, Z. Zhang, R. Yao, and J. Qie, Orientation optimization of cable-driven parallel manipulator for cleaning the deep-sea fishing ground, International Journal of Robotics and Automation, 35(5), 2020. DOI: 10.2316/J.2020.206-0316
  7. [7] W.H. Yang and Y.S. Tarng, Design optimization of cutting parameters for turning operations based on the Taguchi method, Journal of Materials Processing Technology, 84(1), 1998, 122–129. DOI: 10.1016/S0924-0136(98)00079-X
  8. [8] X. Shan and G. Cheng, Kinematic analysis and parameter optimization for a novel 2(3HUS+S) parallel hip joint simulator, International Journal of Robotics and Automation, 32(4), 2017, 379–386. DOI: 10.2316/Journal.206.2017.4.206-4824
  9. [9] J.A. Ghani, I.A. Choudhury, and H.H. Hassan, Application of Taguchi method in the optimization of end milling parameters, Journal of Materials Processing Technology, 145(1), 2004, 84–92. DOI: 10.1016/S0924-0136(03)00865-3
  10. [10] P.P. Das, P. Gupta, R.K. Ghadai, M. Ramachandran, and K. Kalita, Optimization of turning process parameters by Taguchi – based six sigma, Mechanics and Mechanical Engineering, 21(3), 2017, 649–656.
  11. [11] G.P. Maul and M.B. Thomas, A systems model and simulation of the vibratory bowl feeder, Journal of Manufacturing Systems, 16(5), 1997, 309–314. DOI: 10.1016/S0278-6125(97)88461-0
  12. [12] M. Suresh, K.A. Jagadeesh, J. Sakthivel, Prediction of parameters using linear regression for trap in a vibratory part feeder, International Journal of Research in Mechanical Engineering, 2(1), 2014, 43–47.
  13. [13] M. Suresh and S.A. Barathwaj, Analysis of a part using dynamic simulation and real time experiments in part feeders, International Journal of Mechanical and Production Engineering Research and Development, 8(5), 2018, 133–142. DOI: 10.24247/ijmperdoct201817
  14. [14] H. Guo and A. Mettas, Design of experiments and data analysis, Annual Reliability and Maintainability Symposium, January 2011.
  15. [15] J.K. Telford, A Brief introduction to design of experiments, John Hopkins APL Technical Digest, 27(3), 2007, 224–232.
  16. [16] B. Durakovic, Design of experiments application, concepts, examples: state of the art, Periodicals of Engineering and Natural Sciences, 5(3), 2017, 421–439. DOI: 10.21533/pen.v5i3.145
  17. [17] B. Durakovic and H. Basic, Continuous quality improvement in textile processing by statistical process control tools – A case study of medium-sized company, Periodicals of Engineering and Natural Science, 1(1), 2013, 36–46.
  18. [18] B.K. Rout and R.K. Mittal, Optimal manipulator tolerance design using hybrid evolutionary optimization technique, International Journal of Robotics and Automation, 22(4), 2007, 263–271.
  19. [19] M. Moravi`e, D. Hroncová, O. Ostertag, Vibration of mechanical system using MSC Adams software, American Journal of Mechanical Engineering, 3(6), 2015, 244–247. DOI: 10.12691/ajme-3-6-18
  20. [20] M. Suresh, V. Narasimharaj, G.K. Arul Navalan, and V. Chandra Bose, Effect of orientations of an irregular part in vibratory part feeders, International Journal of Advanced Manufacturing Technology, 94(5), 2017, 2689–2702. DOI: 10.1007/s00170-0171043-1

Important Links:

Go Back