AN OVERVIEW ON COGGING TORQUE AND TORQUE RIPPLE REDUCTION IN FLUX SWITCHING MACHINES, 130-144.

Udochukwu B. Akuru

References

  1. [1] S.E. Rauch and L.J. Johnson, Design principles of flux-switching alternators, Transactions of the American Institute of Electrical Engineers. Part III: Power Apparatus and Systems, 74, 1955, 1261–1268.
  2. [2] J.X. Shen and W.Z. Fei, Permanent magnet flux switching machines—Topologies, analysis and optimization, 4th International Conf. on Power Engineering, Energy and Electrical Drives, Istanbul, 2013, 352–366.
  3. [3] E.B. Sulaiman, T. Kosaka, and N. Matsui, Design study and experimental analysis of wound field flux switching motor for HEV applications, Presented at the XXth International Conf. on Electrical Machines (ICEM), Marseille, France, 2–5 Sep. 2012, 1269–1275.
  4. [4] E. Hoang, A. Ben Ahmed, and J. Lucidarme, Switching flux permanent magnet polyphased synchronous machines, EPE-97 Conf., Trondheim, Norway, Sep. 1997.
  5. [5] C. Pollock and M. Wallace, The flux switching motor, a DC motor without magnets or brushes, Conf. Record of the IEEE Industry Applications Conf., Thirty-Forth IAS Annual Meeting, Phoenix, AZ, vol. 3, 1999, 1980–1987.
  6. [6] C. Pollock and M. Brackley, Comparison of the acoustic noise of a flux-switching and a switched reluctance drive, IEEE Transactions on Industry Applications, 39 (3), 2003, 826–834.
  7. [7] Y. Amara, E. Hoang, M. Gabsi, M. Lecrivain, and S. Allano, Design and comparison of different flux-switch synchronous machines for an oil breather application, European Transactions on Electrical Power, 15 (6), 2005, 497–511.
  8. [8] W. Hua, Z.Q. Zhu, M. Cheng, Y. Pang, and D. Howe, Comparison of flux-switching and doubly-salient permanent magnet brushless machines, ICEMS, Nanjing, China, vol. 1, 27–29 Sep. 2005, 165–170.
  9. [9] W. Hua, C. Ming, Z.Q. Zhu, and D. Howe, Design of flux-switching permanent magnet machine considering the limitation of inverter and flux-weakening capability, Conf. Record of the 2006 IEEE Industry Applications Conf., 41st IAS Annual Meeting, Tampa, FL, USA, vol. 5, 8–12 Oct. 2006, 2403–2410.
  10. [10] Y. Pang, Z.Q. Zhu, D. Howe, S. Iwasaki, R. Deodhar, and A. Pride, Comparative study of flux-switching and interior permanent magnet machines, International Conf. on Electrical Machines and Systems, ICEMS, Seoul, Republic of Korea, 8–11 Oct. 2007, 757, 762.
  11. [11] W. Hua, M. Cheng, Z.Q., Zhu, W. Zhao, and X. Kong, Comparison of electromagnetic performance of brushless motors having magnets in stator and rotor, Journal of Applied Physics, 103 (7), 2008, 07F124, 07F124-3.
  12. [12] Z.Q. Zhu, Y. Pang, J.T. Chen, Z.P. Xia, and D. Howe, Influence of design parameters on output torque of flux-switching permanent magnet machines, IEEE Vehicle Power and Propulsion Conf., VPPC, Harbin, Hei Longjiang, China, 3–5 Sep. 2008, 1, 6.
  13. [13] A.S. Thomas, Z.Q. Zhu, R.L. Owen, G.W. Jewell, and D. Howe, Multi-phase flux-switching permanent magnet brushless machine for aerospace application, IEEE Industry Applications Society Annual Meeting, Edmonton, AB, 2008, 1–8.
  14. [14] J.T. Chen, Z.Q. Zhu, S. Iwasaki, and R. Deodhar, Comparison of losses and efficiency in alternate switching flux permanent magnet machines, XIX International Conf. on Electrical Machines – ICEM, Rome, 2010, 1–6.
  15. [15] J.T. Chen and Z.Q. Zhu, Winding configurations and optimal stator and rotor pole combination of flux-switching PM brushless AC machines, IEEE Transactions on Energy Conversion, 25 (2), 2010, 293–302.
  16. [16] A. Chen, R. Nilssen, and A. Nysveen, Investigation of a three-phase flux-switching permanent magnet machine for downhole applications, XIX International Conf. on Electrical Machines – ICEM, Rome, 2010, 1–5.
  17. [17] Y. Tang, J.J.H. Paulides, T.E. Motoasca, and E.A. Lomonova, Flux-switching machine with DC excitation, IEEE Transactions on Magnetics, 48 (11), 2012, 3583–3586.
  18. [18] L.E. Somesan and I.A. Viorel, Permanent magnet flux-switching machine, optimal design and performance analysis, Advances in Electrical Engineering, 11 (2), 2013, 46–53.
  19. [19] A. Fasolo, L. Alberti, and N. Bianchi, Performance comparisonbetween switching-flux and IPM machines with rare-earth and ferrite PMs, IEEE Transactions on Industry Applications, 50 (6), 2014, 3708–3716.
  20. [20] Y.J. Zhou and Z.Q. Zhu, Comparison of wound-field switched-flux machines, IEEE Transactions on Industry Applications, 50 (5), 2014, 3314–3324.
  21. [21] J.D. McFarland, T.M. Jahns, and A.M. El-Refaie, Demagnetization performance characteristics of flux switching permanent magnet machines, International Conf. on Electrical Machines (ICEM), Berlin, Germany, 2014, 2001–2007.
  22. [22] T. Raminosoa, A.M. El-Refaie, D. Pan, et al., Reduced rareearth flux-switching machines for traction applications, IEEE Transactions on Industry Applications, 51 (4), 2015, 2959–2971.
  23. [23] L. Shao, W. Hua, Z.Q. Zhu, M. Cheng, and Z. Wu, A novel flux-switching permanent magnet machine with overlapping windings, IEEE Transactions on Energy Conversion, 32 (1), 2017, 172–183.
  24. [24] H. Hwang, D. Kim, C. Lee, and H. Jin, Torque ripple reduction in a flux-switching permanent magnet machine targeted at elevator door applications by minimizing space harmonics, IEEE Energy Conversion Congress and Exposition (ECCE), Milwaukee, WI, 2016, 1–5.
  25. [25] M. Cheng, W. Hua, J. Zhang, and W. Zhao, Overview of stator-permanent magnet brushless machines, IEEE Transactions on Industrial Electronics, 58 (11), 2011, 5087–5101.
  26. [26] E. Hoang, M. Lecrivain, and M. Gabsi, A new structure of a switching flux synchronous polyphased machine with hybrid excitation, European Conf. on Power Electronics and Applications, Aalborg, 2007, 1–8.
  27. [27] F. Khan, E. Sulaiman, and M.Z. Ahmad, Review of switched flux wound-field machines technology, IETE Technical Review, 34 (4), 2017, 343–352.
  28. [28] Z.Q. Zhu and S. Cai, Overview of hybrid excited machines for electric vehicles, Fourteenth International Conf. on Ecological Vehicles and Renewable Energies (EVER), Monte-Carlo, Monaco, 2019, 1–14.
  29. [29] W. Xu, J. Zhu, Y. Zhang, and J. Hu, Cogging torque reduction for radially laminated flux-switching permanent magnet machine with 12/14 poles, IECON 2011 – 37th Annual Conf. of the IEEE Industrial Electronics Society, Melbourne, VIC, 2011, 3590–3595.
  30. [30] Z.Q. Zhu, A.S. Thomas, J.T. Chen, and G.W. Jewell, Cogging torque in flux-switching permanent magnet machines, IEEE Transactions on Magnetics, 45 (10), 2009, 4708–4711.
  31. [31] Y. Mao, G. Liu, W. Zhao, and J. Ji, Vibration prediction in fault-tolerant flux-switching permanent-magnet machine under healthy and faulty conditions, IET Electric Power Applications, 11 (1), 2017, 19–28.
  32. [32] A. Chen, N. Rotevatn, R. Nilssen, and A. Nysveen, Characteristic investigations of a new three-phase flux-switching permanent magnet machine by FEM simulations and experimental verification, International Conf. on Electrical Machines and Systems, Tokyo, 2009, 1–6.
  33. [33] H. Yang, H. Lin, E. Zhuang, Y. Guo, Y. Feng, and X. Lu, Cogging torque minimisation of novel switched flux permanent magnet memory machine by structural variation, 7th IET International Conf. on Power Electronics, Machines and Drives (PEMD 2014), Manchester, 2014, 1–6.
  34. [34] V. Pyrh¨onen, T. Jokinen, and V. Hrabovcova, Design of rotating electrical machines, 5th ed. (Chichester, West Sussex, UK: John Wiley & Sons, Ltd, 2008).
  35. [35] N. Madani, Design of a permanent magnet synchronous generator for a vertical axis wind turbine, MSc Thesis, School of Electrical Engineering, Royal Institute of Technology, Stockholm, Sweden, 2011.
  36. [36] D.-J. Bang, Design of transverse flux permanent magnet machines for large direct-drive wind turbines, PhD Thesis, Pukyong National University, Korea, 2010.
  37. [37] E. Nipp, Permanent magnet motor drives with switched stator windings, Doctor’s Thesis, Royal Institute of Technology, Stockholm, May 1999.
  38. [38] L. Hao, M. Lin, X. Zhao, and H. Luo, Analysis and optimization of EMF waveform of a novel axial field flux-switching permanent magnet machine, International Conf. on Electrical Machines and Systems, Beijing, 2011, 1–6.
  39. [39] J. Yan, H. Lin, Y. Huang, H. Liu, and Z.Q. Zhu, Magnetic field analysis of a novel flux switching transverse flux permanent magnet wind generator with 3-D FEM, 2009 International Conf. on Power Electronics and Drive Systems (PEDS), Taipei, 2009, 332–335.
  40. [40] L. Hao, M. Lin, D. Xu, and W. Zhang, Cogging torque reduction of axial field flux-switching permanent magnet machine by adding magnetic bridge in stator tooth, IEEE Transactions on Applied Superconductivity, 24 (3), 2014, 1–5.
  41. [41] B. Zhang, T. Epskamp, M. Doppelbauer, and M. Gregor, A comparison of the transverse, axial and radial flux PM synchronous motors for electric vehicle, 2014 IEEE International Electric Vehicle Conf. (IEVC), Florence, 2014, 1–6.
  42. [42] G. Zhao and W. Hua, A novel flux switching permanent magnet machine with V-shaped magnets, AIP Advances, 7, 2017, 056655.
  43. [43] W. Fei, P.C.K. Luk, and J. Shen, Torque analysis of permanent magnet flux switching machines with rotor step skewing, IEEE Transactions on Magnetics, 48 (10), 2012, 2664–2673.
  44. [44] W. Hua and M. Cheng, Cogging torque reduction of flux-switching permanent magnet machines without skewing, International Conf. on Electrical Machines and Systems, Wuhan, 2008, 3020–3025.
  45. [45] Y. Wang, M.J. Jin, W.Z. Fei, and J.X. Shen, Cogging torque reduction in permanent magnet flux-switching machines by rotor teeth axial pairing, IET Electric Power Applications, 4 (7), 2010, 500–506.
  46. [46] C. Sikder, I. Husain, and W. Ouyang, Cogging torque reduction in flux-switching permanent-magnet machines by rotor pole shaping, IEEE Transactions on Industry Applications, 51 (5), 2015, 3609–3619.
  47. [47] D. Xu, M. Lin, X. Fu, L. Hao, W. Zhang, and N. Li, Cogging torque reduction of a hybrid axial field flux-switching permanent-magnet machine with three methods, IEEE Transactions on Applied Superconductivity, 26 (4), 2016, 1–5.
  48. [48] U.B. Akuru and M.J. Kamper, Formulation and multiobjective design optimization of wound-field flux switching machines for wind energy drives, IEEE Transactions on Industrial Electronics, 65 (2), 2018, 1828–1836.
  49. [49] J.R. Fard and M. Ardebili, Optimal design and analysis of the novel low cogging torque axial flux-switching permanent-magnet motor, Electric Power Components and Systems, 46 (11–12), 2018, 1330–1339.
  50. [50] U.B. Akuru and M.J. Kamper, Intriguing behavioural characteristics of rare-earth-free flux switching wind generators at small- and large-scale power levels, IEEE Transactions on Industry Applications, 54 (6), 2018, 5772–5782.
  51. [51] X. Zhu, W. Hua, Z. Wu, W. Huang, H. Zhang, and M. Cheng, Analytical approach for cogging torque reduction in flux-switching permanent magnet machines based on magneto motive force-permeance model, IEEE Transactions on Industrial Electronics, 65 (3), 2018, 1965–1979.
  52. [52] P. Su, W. Hua, Z. Wu, P. Han, and M. Cheng, Analysis of the operation principle for rotor permanent magnet flux switching machines, IEEE Transactions on Industrial Electronics, 65 (2),2018, 1062–1073.
  53. [53] N. Larsen, A. Gensior, and P. Hein, Torque ripple reduction based on current control for a flux switching permanent magnet machine, International Symposium on Power Electronics Power Electronics, Electrical Drives, Automation and Motion, Sorrento, 2012, 712–717.
  54. [54] D. Wang, X. Wang, and S.Y. Jung, Reduction on cogging torque in flux-switching permanent magnet machine by teeth notching schemes, IEEE Transactions on Magnetics, 48 (11), 2012, 4228–4231.
  55. [55] L. Hao, M. Lin, D. Xu, W. Zhang, and N. Li, Rotor design techniques for reducing the cogging torque in a novel dual-rotor axial field flux-switching permanent magnet machine, 17th International Conf. on Electrical Machines and Systems (ICEMS), Hangzhou, 2014, 1581–1586.
  56. [56] L. Hao, M. Lin, D. Xu, N. Li, and W. Zhang, Analysis of cogging torque reduction techniques in axial-field flux-switching permanent-magnet machine, IEEE Transactions on Applied Superconductivity, 26 (4), 2016, 1–5.
  57. [57] W. Hua, P. Su, M. Tong, and J. Meng, Investigation of a five-phase E-core hybrid-excitation flux-switching machine for EV and HEV applications, IEEE Transactions on Industry Applications, 53 (1), 2017, 124–133.
  58. [58] M. Dhifli, H. Ennassiri, Y. Amara, and G. Barakat, Impact of the airgap magnetic field harmonics on the performances of a disc type flux switching machine for wind application, XXII International Conf. on Electrical Machines (ICEM), Lausanne, 2016, 2431–2437.
  59. [59] J.H. Kim, Y. Li, E. Cetin, and B. Sarlioglu, Cogging torque minimization with rotor tooth shaping in axial flux-switching permanent magnet machine, IEEE Energy Conversion Congress and Exposition (ECCE), Milwaukee, WI, 2016, 1–7.
  60. [60] C. Sikder, I. Husain, and W. Ouyang, Design, control and implementation of a non-rare-earth flux switching permanent magnet machine, IEEE Energy Conversion Congress and Exposition (ECCE), Milwaukee, WI, 2016, 1–8.
  61. [61] D. Xie, Y. Wang, and Z. Deng, Torque ripple reduction of flux-switching machines with twisted-rotor structure, 17th International Conf. on Electrical Machines and Systems (ICEMS), Hangzhou, 2014, 2508–2512.
  62. [62] W. Huang and W. Hua, A finite-control-set-based model-predictive-flux-control strategy with iterative learning control for torque ripple minimization of flux-switching permanent magnet machines, IEEE Vehicle Power and Propulsion Conf. (VPPC), Hangzhou, 2016, 1–6.
  63. [63] L. Shao, W. Hua, Z.Q. Zhu, et al., Investigation on phase shift between multiple multiphase windings in flux-Switching permanent magnet machines, IEEE Transactions on Industry Applications, 53 (3), 2017, 1958–1970.
  64. [64] L. Shao, W. Hua, Z.Q. Zhu, et al., Influence of rotor-pole number on electromagnetic performance in twelve-phase redundant switched flux permanent magnet machines for wind power generation, IEEE Transactions on Industry Applications, 53 (4), 2017, 3305–3316.
  65. [65] S.R. Aleksandrov, L. Wang, D.T.E.H. van Casteren, J.J.H. Paulides, and E.A. Lomonova, Semi-analytical analysis of rotating and linear flux-switching PM machines including skewing, Twelfth International Conf. on Ecological Vehicles and Renewable Energies (EVER), Monte-Carlo, Monaco, 2017, 1–5.
  66. [66] I. Hussain, F. Khan, U. Zafar, N. Ahmad, and N. Iqbal, Cogging torque reduction of flux-switching permanent magnet machine with overlapping windings, 2018 1st International Conf. on Power, Energy and Smart Grid (ICPESG), Mirpur, Azad Kashmir, 2018, 1–6.
  67. [67] X. Zhu and W. Hua, Cogging torque suppression in flux-switching permanent magnet machines by superposition of single rotor tooth, IEEE Energy Conversion Congress and Exposition (ECCE), Portland, OR, 2018, 4359–4366.
  68. [68] Z. Xiang, X. Zhu, L. Quan, and D. Fan, Optimization design and analysis of a hybrid permanent magnet flux-switching motor with compound rotor configuration, CES Transactions on Electrical Machines and Systems, 2 (2), 2018, 200–206.
  69. [69] P. Golatgaonkar, B. Chaudhari, and R. Ugale, Torque ripple reduction in homopolar poly-phase transverse flux machine, The Journal of Engineering, 2019 (17), 2019, 3553–3558.
  70. [70] Z. You and S. Yang, Modeling torque characteristic of single-phase DC-excited flux switching motor for torque ripple reduction, IECON 2018 – 44th Annual Conf. of the IEEE Industrial Electronics Society, Washington, DC, 2018, 565–570.
  71. [71] C.C. Awah, Z.Q. Zhu, Z.Z. Wu, et al., Comparison of partitioned stator switched flux permanent magnet machines having single- or double-layer windings, IEEE Transactions on Magnetics, 52 (1), 2016, 9500310.
  72. [72] H. Yang, H. Lin, E. Zhuang, Y. Guo, Y. Feng, and X. Lu, Cogging torque minimisation of novel switched flux permanent magnet memory machine by structural variation, 7th IET International Conf. on Power Electronics, Machines and Drives (PEMD 2014), Manchester, 2014, 1–6.
  73. [73] H. Chen, A.M. EL-Refaie, and N.A.O. Demerdash, Flux-switching permanent magnet machines: A review of opportunities and challenges—Part I: Fundamentals and topologies, IEEE Transactions on Energy Conversion, 35 (2), 2020, 684–698.
  74. [74] H. Chen, A.M. EL-Refaie, and N.A.O. Demerdash, Flux-switching permanent magnet machines: A review of opportunities and challenges—Part II: Design aspects, control and emerging trends, IEEE Transactions on Energy Conversion, 35 (2), 2020, 699–713.
  75. [75] 3.2 MW Permavent r Flux-Switching Permanent Magnet (FSPM) drive by VENPOWER/ JacobsPowerTec:http://www.venpower.de/index.html (last accessed January 26, 2020).

Important Links:

Go Back