Yanzhi Zhao, Bowen Liang, Jie Zhang, Lizhe Qi, Dan Zhang, and Wei Yang


  1. [1] G. Bhutani and T.A. Dwarakanath, Novel design solution to high precision 3 axes translational parallel mechanism, Mechanism & Machine Theory, 75(5), 2013, 118–130.
  2. [2] Y.M. Li and Q.S. Xu, Kinematic analysis and design of a new 3-DOF translational parallel manipulator, Journal of Mechanical Design, 128(4), 2006, 729–737.
  3. [3] T.L. Yang, Topology structure design of robot mechanisms (Beijing: China Machine Press, 2004), 79.
  4. [4] T.S. Zhao and Z. Huang, Theory and application of selecting actuating components of spatial parallel mechanisms, Chinese Journal of Mechanical Engineering, 36(10), 2000, 81–85.
  5. [5] X.W. Kong, Detection of input interference in spatial linkages, Journal of Mechanical Transmission, 4, 1999, 23–25.
  6. [6] S.H. Li, X.D. Zhao, W.H. Ding, et al., Research and application of input selecting theory of multi-DOF parallel mechanism, Journal of Machine Design, 27(4), 2010, 62–64.
  7. [7] D.X. Zeng and Z. Huang, Type synthesis of the rotational decoupled parallel mechanism based on screw theory, Science China Technological Sciences, 54(4), 2011, 998–1004.
  8. [8] D. Liang, Y.M. Song, T. Sun, and G. Dong, Optimum design of a novel redundantly actuated parallel manipulator with multiple actuation modes for high kinematic and dynamic performance, Nonlinear Dynamics, 83(1–2), 2015, 631–658.
  9. [9] J.S. Gao, D.P. Liu, J.W. Yang, and Y.S. Zhao, Actuating input selection of a novel parallel machine tool, Robot, 31(6), 2009, 529–534.
  10. [10] Y.H. Chung, J.G. Gang, and J.W. Lee, The effect of actuator relocation on singularity, Jacobian and kinematic isotropy of parallel robots, IEEE/RSJ International Conference on Intelligent Robots and Systems, 3, 2002, 2147–2153.
  11. [11] W.W. Shang and S. Cong, Dexterity and adaptive control of planar parallel manipulators with and without redundant actuation, ASME Journal of Computational and Nonlinear Dynamics, 10(1), 2015, 011002-1–011002-11.
  12. [12] E. Rouhani and M.J. Nategh, Workspace, dexterity and dimensional optimization of microhexapod, Assembly Automation, 35(4), 2015, 341–347.
  13. [13] P. Wu, H. Xiong, and J. Kong, Dynamic analysis of 6-SPS parallel mechanism, International Journal of Mechanics and Materials in Design, 8(2), 2012, 121–128.
  14. [14] S. Guo, C. Wang, H. Qu, et al., A novel 4-RRCR parallel mechanism based on screw theory and its kinematics analysis, Proceedings of Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, 227(9), 2013, 2039–2048.
  15. [15] Z. Huang, S.H. Li, and R.G. Zuo, Feasible instantaneous motions and kinematic characteristics of a special 3-DOF 3UPU parallel manipulator, Mechanism & Machine Theory, 39(9), 2004, 957–970.
  16. [16] X.W. Kong and C.M. Gosselin, Kinematics and singularity analysis of a novel type of 3-CRR 3-DOF translational parallel manipulator, International Journal of Robotics Research, 21(9), 2002, 791–798.
  17. [17] J. Wang, C. Wu, and X.J. Liu, Performance evaluation of parallel manipulators: Motion/force transmissibility and its index, Mechanism & Machine Theory, 45(10), 2010, 1462–1476.

Important Links:

Go Back