DESIGN AND EXPERIMENT OF REMOTE CONTROL PRECISION PLANTER FOR CHINESE CABBAGE VEGETABLE

Lei Wang, Yitao Liao, and Qingxi Liao

References

  1. [1] H.L. Brewer and C.W. Richardson, Some relations among seeding density, germination percentage and plant spacing, Transactions of the ASABE, 21 (3), 1978, 431–434.
  2. [2] F.J. Jafari, S.K. Upadhyaya, and S. Shafii, Development and field evaluation of a hydro pneumatic planter for primed vegetable seeds, Transactions of the ASABE, 37 (4), 1994, 1069–1075.
  3. [3] J.E. McPhee and P.L. Aird, Controlled traffic for vegetable production: part 1. Machinery challenges and options in a diversified vegetable industry, Biosystems Engineering, 116 (2), 2013, 144–154.
  4. [4] S. Ren, H. Yu, and L. Wang, Clustering detection algorithm of plant leaf relative lesion area based on improved GA, Intelligent Automation & Soft Computing, 22 (2), 2015, 249–254.
  5. [5] D.F. Huang, Development countermeasures for mechanization of leaf vegetable production, Journal of Changjiang Vegetables, 2, 2012, 1–6.
  6. [6] H.R. Rowse, D.A. Stone, and D.J. Greenwood, Cultivations, drilling and compaction control in vegetable cropping, Journal of Agricultural Engineering Research, 29 (3), 1984, 215–221.
  7. [7] W. Boa, The design and performance of an automatic transplanter for field vegetables, Journal of Agricultural Engineering Research, 30, 1984, 123–130.
  8. [8] G.V. Prasanna and H. Raheman, Development of a walkbehind type hand tractor powered vegetable transplanter for paper pot seedings, Biosystems Engineering, 110 (2), 2011, 189–197.
  9. [9] P. Guarella, A. Pellerano, and S. Pascuzzi, Experimental and theoretical performance of a vacuum seeder nozzle for vegetable seeds, Journal of Agricultural Engineering Research, 64 (1), 1996, 29–36.
  10. [10] D. Ren, F. Qu, K. Lv, Z. Zhang, H. Xu, and X. Wang, A gradient descent boosting spectrum modeling method based on back interval partial least squares, Neurocomputing, 171 (C), 2016, 1038–1046.
  11. [11] C.W. Suggs, T.N. Thomas, D.L. Eddington, H.B. Peel, T.R. Seaboch, and J.W. Gore, Self-feeding transplanter for tobacco and vegetable crops, Applied Engineering in Agriculture, 3 (2), 1987, 148–152.
  12. [12] A. Yershova, L. Jaillet, T. Simeon, and S.M. LaValle, Dynamicdomain RRTs: Efficient exploration by controlling the sampling domain, IEEE International Conf. on Robotics and Automation, Barcelona, Spain, 2005, 3856–3861.
  13. [13] R.C. Singh, G. Singh, and D.C. Saraswat, Optimisation of design and operational parameters of a pneumatic seed metering device for planting cottonseeds, Biosystems Engineering, 92 (4), 2005, 429–438.
  14. [14] H.M. Xia, Z.W. Li, and W.B. Zhen, Design and experiment of the vegetable seed metering device in pneumatic plate-type, Transactions of the Chinese Society for Agricultural Machinery, 41 (6), 2010, 56–60.
  15. [15] R.L. Parish, P.E. Bergeron, and R.P. Bracy, Comparison of vacuum and belt seeders for vegetable planting, Applied Engineering in Agriculture, 7 (5), 1991, 537–540.
  16. [16] M.R. Maleki, J.F. Jafari, and M.H. Raufat, Evaluation of seed distribution uniformity of a multi-flight auger as a grain drill metering device, Biosystems Engineering, 94 (4), 2006, 535–543.
  17. [17] E. Ahmadi, H.R. Ghassemzadeh, M. Moghaddam, and K.U. Kim, Development of a precision seed drill for oilseed rape, Turkish Journal of Agriculture and Forestry, 32 (5), 2008, 451–458.
  18. [18] Q.X. Liao, M. Zhang, and J.J. Yu, Pneumatic centralized metering device for rapeseed, Transactions of the Chinese Society for Agricultural Machinery, 42 (8), 2011, 30–34.
  19. [19] A. Yazgi and A. Degirmencioglu, Optimisation of the seed spacing uniformity performance of a vacuum-type precision seeder using response surface methodology, Biosystems Engineering, 97 (3), 2007, 347–356.

Important Links:

Go Back