Liping Wang, Dong Wang, and Jun Wu


  1. [1] L.P. Wang, J. Wu, T.M. Li, et al., A study on the dynamiccharacteristics of the 2-DOF redundant parallel manipulatorof a hybrid machine tool, International Journal of Roboticsand Automation, 30(2), 2015, 184–191.
  2. [2] J. Wu, X.L. Chen, L.P. Wang, and X.J. Liu, Dynamic load-carrying capacity of a novel redundantly actuated parallelconveyor, Nonlinear Dynamics, 78(1), 2014, 241–250.
  3. [3] F. Bourbonnais, P. Bigras, and I.A. Bonev, Minimum-timetrajectory planning and control of a pick-and-place five-barparallel robot, IEEE/ASME Transactions on Mechatronics,20(2), 2015, 740–749.
  4. [4] Y. Cao, M.P. Wu, and H. Zhou, Position-singularity character-ization of a special class of the Stewart parallel mechanisms,International Journal of Robotics and Automation, 28(1), 2013,57–64.
  5. [5] Y. Lu, P. Wang, Z.L. Hou, et al., Coordinative dynamics analy-sis of a parallel manipulator with three grippers, InternationalJournal of Robotics and Automation, 29(2), 2014, 184–192.
  6. [6] J. Wu, J.S. Wang, L.P. Wang, and T.M. Li, Dynamics andcontrol of a planar 3-DOF parallel manipulator with actuationredundancy, Mechanism and Machine Theory, 44(4), 2009,835–849.
  7. [7] L. Ren, J.K. Mills, and D. Sun, Trajectory tracking controlfor a 3-DOF planar parallel manipulator using the convexsynchronized control method, IEEE Transactions on ControlSystems Technology, 16(4), 2008, 613–623.
  8. [8] W.W. Shang, S. Cong, and Y. Ge, Adaptive computed torquecontrol for a parallel manipulator with redundant actuation,Robotica, 30(3), 2012, 457–466.
  9. [9] M. Diaz-Rodriguez, A. Valera, V. Mata, and M. Valles, Model-based control of a 3-dof parallel robot based on identified rele-vant parameters, IEEE/ASME Transactions on Mechatronics,18(6), 2013, 1737–1744.
  10. [10] X.Y. Wang and Y.J. Pi, Trajectory tracking control of ahydraulic parallel robot manipulator with lumped disturbanceobserver, International Journal of Robotics and Automation,28(2), 2013, 103–111.
  11. [11] J. Wu, D. Wang, and L.P. Wang, A control strategy of a twodegrees-of-freedom heavy duty parallel manipulator, Journalof Dynamic Systems, Measurement and Control-Transactionsof the ASME, 37(6), 2015, 061007-1–061007-10.
  12. [12] M. Grotjahn and B. Heimann, Model-based feed-forward con-trol in industrial robotics, International Journal of RoboticsResearch, 21(1), 2002, 99–114.
  13. [13] F. Merrikh-Bayat and M. Karimi-Ghartemani, Method fordesigning PIλDμ stabilisers for minimum-phase fractional-order systems, IET Control Theory and Applications, 4(1),2010, 61–70.
  14. [14] I. Podlubny, Fractional-order systems and PIλDμ controllers,IEEE Transactions on Automatic Control, 44(1), 1999,208–214.
  15. [15] I. Petras, Fractional-order feedback control of a DC motor,Journal of Electrical Engineering 60(3), 2009, 117–128.
  16. [16] K. Erenturk, Fractional-order PIλDμ and active disturbancerejection control of nonlinear two-mass drive system, IEEETransactions on Industrial Electronics, 60(9), 2013, 3806–3813.
  17. [17] Y. Luo, Y.Q. Chen, C.Y. Wang, and Y.G. Pi, Tuning frac-tional order proportional integral controllers for fractional ordersystems, Journal of Process Control, 20(7), 2010, 823–831.
  18. [18] Y. Luo and Y.Q. Chen, Fractional order [proportional deriva-tive] controller for a class of fractional order systems, Auto-matica, 45(10), 2009, 2446–2450.
  19. [19] Q.C. Li, Z. Chen, Q.H. Chen, C.Y. Wu, et al., Hu, Parasiticmotion comparison of 3-PRS parallel mechanism with dif-ferent limb arrangements, Robotics and Computer-IntegratedManufacturing, 27(2), 2011, 389–396.
  20. [20] A. Oustaloup, B. Mathieu, and P. Lanusse, The CRONE controlof resonant plants: Application to a flexible transmission,European Journal of Control, 1(2), 1995, 113–121.

Important Links:

Go Back