INVESTIGATION ON VELOCITY PERFORMANCE DEVIATION OF SERIAL MANIPULATORS RESULTED FROM FABRICATION ERRORS

Kuei-Jen Cheng and Pi-Ying Cheng

References

  1. [1] P.K. Bhatti and S.S. Rao, Reliability analysis of robot manipulators, ASME Journal of Mechanisms, Transmissions, and Automation in Design, 110, 1988, 175–181.
  2. [2] Y.H. Andrew Liou, P.P. Lin, R. R. Lindeke, and H.D. Chiang, Tolerance specification of robot kinematic parameters using an experimental design technique – the Taguchi method, Robotics & Computer-Integrated Manufacturing, 10, 1993, 199–207.
  3. [3] T.S. Liu and J.D. Wang, A reliability approach to evaluating robot accuracy performance, Mechanism and Machine Theory, 29(1), 1994, 83–94.
  4. [4] Z. Shi, Reliability analysis & synthesis of robot manipulators, Proc. Annual Reliability and Maintainability Symposium, Anaheim, California, 1994, 201–205.
  5. [5] J.C. Musto and G.N. Saridis, Task reliability assessment in robotic systems, Journal of Robotic Systems, 12(9), 1995, 583–598.
  6. [6] S.S. Rao and P.K. Bhatti, Probabilistic approach to manipulator kinematics and dynamics, Reliability Engineering and System Safety, 72, 2001, 47–58.
  7. [7] P.S. Shiakolas, K.L. Conrad, and T.C. Yih, On the accuracy, reliability, and degree of influence of kinematics parameters for industrial robots, International Journal of Modeling and Simulation, 3, 2002, 1–10.
  8. [8] B.K. Rout and R.K. Mittal, Tolerance design of robot parameters using Taguchi method, Mechanical Systems and Signal Processing, 20, 2006, 1832–1852.
  9. [9] W. Wu and S.S. Rao, Uncertainty analysis and allocation of joint tolerances in robot manipulators based on interval analysis, Reliability Engineering and System Safety, 92, 2007, 54–64.
  10. [10] K. Jayaram and K. Sankaranarayanasamy, Tolerance synthesis of robot dynamic parameters using artificial neutral networks, Manufacturing Engineering, 4(6), 2007, 69–72.
  11. [11] B.K. Rout and R.K. Mittal, Tolerance design of manipulator parameters using design of experiment approach, Structural and Multidisciplinary Optimization, 34, 2007, 445–462.
  12. [12] J.-P. Merlet, Interval analysis and reliability in robotics, International Journal of Reliability and Safety, 3(1–3), 2009, 104–130. 331
  13. [13] J. Kim, W.-J. Song, and B.-S. Kang, Stochastic approach to kinematic reliability of open-loop mechanism with dimensional tolerance, Applied Mathematical Modelling, 34, 2010, 1225– 1237.
  14. [14] J. Wang, J. Zhang, and X. Du, Hybrid dimension reduction for mechanism reliability analysis with random joint clearances, Mechanism and Machine Theory, 46, 2011, 1396–1410.
  15. [15] Z. Sun, T. Yu, W. Cui, and B. Song, Reliability analysis for close position accuracy of gear door mechanism based on importance sampling, Proc. Annual IEEE International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering, Xi’an, China, 2011, 168–172.
  16. [16] M.D. Pandey and X. Zhang, System reliability analysis of the robotic manipulator with random joint clearances, Mechanism and Machine Theory, 58, 2012, 137–152.
  17. [17] Y.S. Feng, The development of a theory of mechanism reliability, Reliability Engineering and System Safety, 41, 1993, 95–99.
  18. [18] Z. Huang and T. Shi, The motion accuracy reliability research of hydraulic amplifier mechanism in naval ships, Proc. Annual 2011 IEEE International Conference on Electronic & Mechanical Engineering and Information Technology, Harbin, Heilongjiang, China, 2011, 2777–2780.
  19. [19] S.A. Hayati, Robot arm geometric link parameter estimation, Proc. 22nd IEEE International Conference on Decision and Control, San Antonio, Texas, 1983, 1477–1483.
  20. [20] W.K. Veitchegger and C.-H. Wu, Robot accuracy analysis based on kinematics, IEEE Journal of Robotics and Automation, 2(3), 1986, 171–179.
  21. [21] W.K. Veitchegger and C.-H. Wu, Robot calibration and compensation, IEEE Journal of Robotics and Automation, 4(6), 1988, 643–656.
  22. [22] K.-J. Cheng and P.-Y. Cheng, The investigation of the maneuverability deterioration based on acceleration radius theory, Mechatronics, 19, 2009, 1211–1220.
  23. [23] T. Yoshikawa, Manipulability of robotic mechanisms, The International Journal of Robotics Research, 4(2), 1985, 3–9.
  24. [24] R. Coeppe and T. Yoshikawa, Dynamic manipulability analysis of compliant motion, Proc. Annual International Conference on Intelligent Robots and Systems, Grenoble, France, 1997, 1472–1478.
  25. [25] S.R. Ploen, A skew-symmetric form of the recursive Newton– Euler algorithm for the control of multibody systems, Proc. Annual American Conference on Control, San Diego, California, 1999, 3770–3773.
  26. [26] J. Kövecses, R.G. Fenton, and W.L. Cleghorn, Effects of joint dynamics on the dynamic manipulability of geared robot manipulators, Mechatronics, 11, 2001, 43–58.
  27. [27] K. Abdel-Malek, W. Yu, and J. Yang, Placement of robot manipulators to maximize dexterity, International Journal of Robotics and Automation, 19(1), 2004, 6–15.

Important Links:

Go Back