A STUDY OF SHARP INCREASE PHENOMENON IN CONSTRAINT TORQUE ON THE UNIVERSAL JOINT OF 3-PUU PARALLEL MANIPULATOR

Jianwen Zhao, Bo Huang, and Dingguo Hua

References

  1. [1] D. Zlatanov, I.A. Bonev, and C.M. Gosselin, Constraint singularities of parallel mechanism, IEEE Int. Conf. on Robotics and Automation, 2002, 497–503.
  2. [2] S.A. Joshi and L.W. Tsai, Jacobian analysis of limited-DOF parallel manipulators, Journal of Mechanical Design, 124(6), 2002, 254–258.
  3. [3] Z. Matteo, B. Luca, and M. Rezia, Constraint singularities of force transmission in nonredundant parallel robots with less than six degrees of freedom, Journal of Mechanical Design, 125(3), 2003, 557–563.
  4. [4] J. Hubert and J.P. Merlet, Static of parallel manipulators and closeness to singularity, Journal of Mechanisms and Robotics, 1(1), 2009, 1–6.
  5. [5] D. Gregorio and A. Raffaele, Statics and singularity loci of the 3-UPU wrist, IEEE Transactions on Robotics, 20(4), 2004, 630–635.
  6. [6] Y. Lu, Y. Shi, and J.P. Yu, Kinematic analysis of limited-DOF parallel manipulators based on translational/rotational Jacobian and Hessian matrices, Robotica, 27(7), 2009, 971–980.
  7. [7] H.B. Qu, Y.F. Fang, and S. Guo, A new method for isotropic analysis of limited DOF parallel manipulators with terminal constraints, Robotica, 29(4), 2011, 563–569.
  8. [8] T. Sun, Y.M. Song, Y.G. Li, and L. Xu, Separation of comprehensive geometrical errors of a 3-DOF parallel manipulator based on Jacobian matrix and its sensitivity analysis with Monte-Carlo method, Chinese Journal of Mechanical Engineering (English Edition), 24(3), 2010, 406–413.
  9. [9] P. Hodjat, R. Hajir, S. Hoda, and Z. Hassan, Singularity analysis of a 3DOF parallel manipulator using infinite constraint plane method, Journal of Intelligent and Robotic Systems: Theory and Applications, 53(1), 2008, 21–34.
  10. [10] P. Hodjat, M. Maryam, and Z. Hassan, Singularity analysis of parallel manipulators using constraint plane method, Mechanism and Machine Theory, 46(1), 2011, 33–43.
  11. [11] R. Gregorio and P.C. Vincenzo, Mobility analysis of the 3-UPU parallel mechanism assembled for a pure translational motion, Journal of Mechanical Design, 124(6), 2002, 259–264.
  12. [12] J.F. Li, X.H. Wang, and R.Y. Fei, Performance analysis and kinematic design of pure translational parallel mechanism with vertical guideways, Chinese Journal of Mechanical Engineering (English Edition), 19(2), 2006, 300–306.
  13. [13] Y. Lu, Y. Shi, and B. Hu, Kinematic analysis of two novel 3UPU I and 3UPU II PKMs, Robotics and Autonomous Systems, 56(4), 2008, 296–305.
  14. [14] Y.M. Li and Q.S. Xu, Design and development of a medical parallel robot for cardiopulmonary resuscitation, IEEE/ASME Transactions on Mechatronics, 12(3), 2007, 265–273.
  15. [15] Y.M. Li and Q.S. Xu, Stiffness analysis for a 3-PUU parallel kinematic machine, Mechanism and Machine Theory, 43(2), 2008, 186–200.
  16. [16] Y.M. Li and Q.S. Xu, A new approach to the architecture optimization of a general 3-PUU translational parallel manipulator, Journal of Intelligent and Robotic Systems: Theory and Applications, 46(1), 2006, 59–72.
  17. [17] H.P. Lin and Y.M. Xu, Development of NC system of the 3-PUU parallel machine tool based on PMAC, Advanced Materials Research, 142, 2011, 233–237.
  18. [18] G. Legnani, I. Fassi, H. Giberti, S. Cinquemani, and D. Tosi, A new isotropic and decoupled 6-DoF parallel manipulator, Mechanism and Machine Theory, 58(9), 2012, 64–81.

Important Links:

Go Back