PERFORMANCE ANALYSIS OF A PACKED BED WASTE HEAT RECOVERY SYSTEM BASED ON MODELLING RESULTS

Amir Rahimi and Mahdi Ghaffarlou Raef

References

  1. [1] A.E. Saez and B.J. McCoy, Dynamic response of a packed bedthermal storage system – a model for solar air heating, SolarEnergy, 29(3), 1982, 201–206.
  2. [2] D.E. Beasley and J.A. Clark, Transient response of a packedbed for thermal energy storage, International Journal of Heatand Mass Transfer, 27(9), 1984, 1659–1669.
  3. [3] F.W. Schmidt and A.J. Willmott, Thermal energy storage andregeneration, (Washington, DC: Hemisphere Publishing Co,1981).
  4. [4] J.A. Duffie and W.A. Beckmann, Solar engineering of thermalprocesses, (New York, NY: John Wiley and Sons, 1980).
  5. [5] D.E. Beasley, C. Ramanarayanan, and H. Torab, Thermalresponse of a packed bed of spheres containing a phase-changematerial, International Journal of Energy Research, 13(3),1989, 253–265.
  6. [6] M.T. Zarrinehkafsh and S.M. Sadrameli, Simulation of fixedbed regenerative heat exchangers for flue gas heat recovery,Applied Thermal Engineering, 24(2–3), 2004, 373–382.
  7. [7] A.E. Saez and B.J. McCoy, Transient analysis of packed-bedthermal storage systems, International Journal of Heat andMass Transfer, 26(1), 1983, 49–54.
  8. [8] R.B. Bird, W.E. Stewart, and E.N. Lightfoot, Transport phe-nomena, (New York, NY: John Wiley and Sons, 1960).
  9. [9] E.C. Nsofor and G.A. Adebiyi, Measurements of the gas–particle convective heat transfer coefficient in a packed bed forhigh-temperature energy storage, Experimental Thermal andFluid Science, 24(1–2), 2001, 1–9.
  10. [10] J. Yu, et al., Study on performance of the ball packed-bedregenerator: Experiments and simulation, Applied ThermalEngineering, 22(6), 2002, 641–651.
  11. [11] A. Benmansour, M.A. Hamdan, and A. Bengeuddach, Exper-imental and numerical investigation of solid particles thermalenergy storage unit, Applied Thermal Engineering, 26(5–6),2006, 513–518.
  12. [12] J.P. Holman, Heat transfer, 9 (Boston, MA: McGraw-Hill,2002).
  13. [13] G.J. Beavers, E.M. Sparrow, and D.E. Rodenz, Influence ofbed size on the flow characteristics and porosity of randomlypacked bed of spheres, Journal of Applied Mechanics, 40(3),1973, 655.
  14. [14] J.M. Smith, H.C. Van Ness, and M.M. Abbott, Introductionto chemical engineering thermodynamics, 6 (New York, NY:McGraw-Hill, 2001).
  15. [15] A.A. Iordanidis, Mathematical modeling of catalytic fixed bedreactors, (Netherlands: Twente University, Press, 2002).
  16. [16] R.H. Perry, Perry’s chemical engineer’s handbook, 7 (NewYork, NY: McGraw-Hill, 1997).

Important Links:

Go Back