MULTIRATE CONTROLLER FOR DUAL ACTUATED SERVOMECHANISM IN HARD DISK DRIVE

A. Al-Mamun, T. Suthasun, S.M. Sri-Jayantha, and T.H. Lee

References

  1. [1] T. Hirano et al., High bandwidth high accuracy rotarymicro-actuators for magnetic hard disk drive tracking servos,IEEE/ASME Trans. on Mechatronics, vol. 3, September 1998,156–165. doi:10.1109/3516.712111
  2. [2] T. Semba, T. Hirano, J. Hong, & L.S. Fan, Dual-stage servocontroller for HDD using MEMS microactuator, IEEE Trans.on Magnetics, 35 (5), 2271–2273.
  3. [3] C.C. Chung, C.W. Seo, & S.H. Lee, Two degree-of-freedomdual stage actuator controller design for hard disk drive, IEEETrans. on Magnetics, 36 (5), 2255–2257.
  4. [4] R.B. Evans, J.S. Griesbach, & W.C. Messner, Piezoelectric microactuator for dual stage control, IEEE Trans. on Magnetics,35 (7), 977–982.
  5. [5] S. Koganezawa, T. Hara, Y. Uematsu, & T. Yamada, Effectof dual-stage actuator on positioning accuracy in 10k rpmmagnetic disk drives, IEEE Trans. on Magnetics, 37 (2), 2001,955–958. doi:10.1109/20.917649
  6. [6] S.H. Lee, Y.H. Kim, & C.C. Chung, Dual-stage actuator diskdrives for improved servo performance: Track Follow, TrackSeek, and Settle, IEEE Trans. on Magnetics, 37 (4), 2001,1887–1890.
  7. [7] S.M. Suh, C.C. Chung, & S.H. Lee, Design and analysis of dual-stage servo system for high track density HDDs, MicrosystemTechnologies, 8 (2–3), 2002, 161–168. doi:10.1007/s00542-002-0182-x
  8. [8] X. Hu, W. Guo, T. Huang, & B.M. Chen, Discrete-timeLQG/LTR dual stage controller design and implementation forhigh tracking density HDDs, Proc. American Control Conf.,San Diego, June 1999, 4111–4115.
  9. [9] Y. Li & R. Horowitz, Design and testing of track-followingcontrollers for dual-stage servo systems with PZT actuatedsuspensions, Microsystem Technologies, 8 (2–3), 2002, 194–205. doi:10.1007/s00542-001-0146-6
  10. [10] G.X. Guo, Q. Hao, & T.S. Low, A dual-stage control designfor high track per inch hard disk drives, IEEE Trans. onMagnetics, 37 (2), 2001, 860–865. doi:10.1109/20.917632
  11. [11] S.J. Schroceck & W.C. Messner, On compensator designfor linear time-invariant dual-input single-output systems,IEEE/ASME Trans. on Mechatronics, 6 (1), 2001, 50–57. doi:10.1109/3516.914391
  12. [12] H.R. Rapley & W.C. Messner, Designing controllers for twostage disk drive actuator systems using the PQ method and theSbode plot, IEEE Trans. on Magnetics, 37 (2), 2001, 944–948. doi:10.1109/20.917647
  13. [13] J. Ding, M. Tomizuka, & H. Numasato, Design and robustnessanalysis of dual stage servo system, Proc. American ControlConf., Chicago, June 2000, 2605–2609.
  14. [14] M. Kobayashi, T. Yamaguchi, & R. Horowitz, Track-seekingcontroller design for dual-stage actuator in magnetic diskdrives, Proc. American Control Conf., Chicago, June 2000,2610–2614.
  15. [15] H. Numasato & M. Tomizuka, Settling control and performanceof dual-actuator system for hard disk drives, Proc. AmericanControl Conf., Arlington, VA, June 2001, 2779–2785.
  16. [16] Y.H. Kim & S.H. Lee, An approach to dual-stage servo designin computer disk drives, IEEE Trans. on Control SystemTechnology, 12 (1), 2004, 12–20. doi:10.1109/TCST.2003.819591
  17. [17] S.H. Lee & Y.H. Kim, Minimum destructive interference designof dual-stage control system for hard disk drive, IEEE Trans.on Control System Technology, 12 (4), 2004, 517–531. doi:10.1109/TCST.2004.825049
  18. [18] M. Sasaki, T. Suzuki, E. Ida, F. Fujisawa, M. Kobayashi, &K. Hirai, Track-following control of a dual-stage hard diskdrive using neuro-control system, Engineering Applications ofArtificial Intelligence, 11, 1998, 707–716. doi:10.1016/S0952-1976(98)00019-0
  19. [19] D.T. Phan, The design and modeling of multirate digitalcontrol systems for disk drive applications, Proc. Asia PacificWorkshop on Advances in Motion Control, Singapore, July1993, 189–205. doi:10.1109/APWAM.1993.316215
  20. [20] T. Hara & M. Tomizuka, Performance enhancement of multiratecontroller for hard disk drives, IEEE Trans. on Magnetics,35 (2), 1999, 898–903. doi:10.1109/20.753805
  21. [21] T. Semba, A design method of a multi-rate servo controllerusing H-infinity, IEEE Trans. on Magnetics, 36 (5), 2000,2219–2221. doi:10.1109/20.908367
  22. [22] P.A. Weaver & R.M. Ehrlich, The use of multirate notch filtersin embedded servo disk drives, Proc. American Control Conf.,Seattle, June 1995, 4156–4160. doi:10.1109/ACC.1995.532714
  23. [23] J. Ding, H. Numasato, & M. Tomizuka, Single/dual-ratedigital controller design for dual stage track following in harddisk drives, Advanced Motion Control: 6th Int. Workshop,AMC2000, Nagoya, Japan, 2000.
  24. [24] J. Schoukens & R. Pintelon, Identification of linear systems:A practical guideline to accurate modelling (London: PergamonPress, 1991).
  25. [25] I. Kollar, Frequency domain system identification toolbox foruse with Matlab, The Mathworks Inc., 1994.
  26. [26] T. Suthasun, I. Mareels, & A. Al Mamun, System identificationand controller design for dual actuated hard disk drive, ControlEngineering Practice, 12, April 2004, 665–676. doi:10.1016/S0967-0661(03)00150-3
  27. [27] A. Al Mamun, T.H. Lee, G.X. Guo, W.E. Wong, & W.C. Ye,Measurement of position offset in hard disk drive using dualfrequency servo bursts, IEEE Trans. on Instrumentation andMeasurement, 52 (6), 2003, 1870–1880. doi:10.1109/TIM.2003.820473
  28. [28] N.C. Singer, Residual vibration reduction in computer controlledmachines, MIT Artificial Intelligence Laboratory, Tech. Report1030\/, January 1989.
  29. [29] S.K. Mitra, Digital signal processing: A computer-based approach (New York: McGraw-Hill, 1998).
  30. [30] G.F. Franklin, J.D. Powell, & M.L. Workman, Digital controlof dynamic systems, 3rd ed. (Addison-Reading, MA: Wesley,1997).
  31. [31] T. Yamaguchi, K. Shishida, S. Tohyama, & H. Hirai, Modeswitching control design with initial value compensation andits application to head positioning control on magnetic diskdrives, IEEE Trans. on Industrial Electronics, 43 (1), 1996,65–73. doi:10.1109/41.481409

Important Links:

Go Back