Reach Envelope of a 9-Degree-of Freedom Model of the Upper Extremity

J. Yang, K. Abdel-Malek, and K. Nebel

References

  1. [1] F.L. Litvin et al., Singularities, configurations, and displace-ment functions for manipulators, International Journal ofRobotics Research, 5(2), 1986, 52–65. doi:10.1177/027836498600500206
  2. [2] T. Shamir, The singularities of redundant robot arms, Inter-national Journal of Robotics Research, 9(1), 1990, 113–121. doi:10.1177/027836499000900105
  3. [3] N.S. Bedrossian & K. Flueckiger, Characterizing spatial re-dundant manipulator singularities, Proc. IEEE Int. Conf. onRobotics and Automation, Sacramento, CA, 1991, 714–719. doi:10.1109/ROBOT.1991.131668
  4. [4] S.K. Singh, Motion planning and control of non-redundantmanipulators at singularities, Proc. IEEE Int. Conf. Roboticsand Automation, Atlanta, GA, 1993, 487–492. doi:10.1109/ROBOT.1993.291910
  5. [5] K. Kreutz, M. Long, & H. Seraji, Kinematic functions forthe 7 DOF Robotics Research arm, NASA Conf. on SpaceTelerobotics, JPL, Vol. 1, 1989, 39–48.
  6. [6] K. Kreutz, M. Long, & H. Seraji, Kinematic analysis of 7-DOF manipulators, International Journal of Robotics Research,11(5), 1992, 469–481. doi:10.1177/027836499201100504
  7. [7] S.B. Nokleby & R.P. Podhorodeski, Reciprocity-based reso-lution of velocity degeneracies (singularities) for redundantmanipulators, Mechanism and Machine Theory, 36, 2001,397–409. doi:10.1016/S0094-114X(00)00051-3
  8. [8] Z. Dvir & N. Berme, The shoulder complex in elevation of thearm: A mechanism approach, Journal of Biomechanics, 11,1978, 219–225. doi:10.1016/0021-9290(78)90047-7
  9. [9] K.M. Jackson, J. Joseph, & S.J. Wyard, Sequential muscularcontraction, Journal of Biomechanics, 10, 1977, 97–100. doi:10.1016/0021-9290(77)90073-2
  10. [10] C. H¨ogfors, B. Peterson, G. Sigholm, & P. Herberts, Biome-chanical model of the human shoulder joint, Journal of Biome-chanics, 24, 1991, 699–709. doi:10.1016/0021-9290(91)90334-J
  11. [11] J.E. Wood, S.G. Meek, & S.C. Jacobsen, Quantitation of humanshoulder anatomy for prosthetic arm control, II: Anatomymatrices, Journal of Biomechanics, 22(4), 1989, 309–325. doi:10.1016/0021-9290(89)90045-6
  12. [12] A.E. Benati, S. Gaglio, V. Tagliasco, & R. Zaccaria, Anthro-pomorphic robotics, Biological Cybernetics, 38, 1980, 25–140.
  13. [13] A.E. Engin, Kinematics of human shoulder motion, in V.C.Mow, A. Rotcliffe, S.L.-Y. Woo (Eds.), Biomechanics of Di-arthrotrial Joints (New York: Springer-Verlag, 1990).
  14. [14] J. Lenarcic & A. Umek, Simple model of human arm reachableworkspace, IEEE Trans. on Systems, Man, and Cybernetics,24(8), 1994, 1239–1246. doi:10.1109/21.299704
  15. [15] W. Maurel, 3D modeling of the human upper limb includingthe biomechanics of joints, muscles and soft tissues, doctoraldiss., Laboratoire d’Infographie–´Ecole Polytechnique F´ed´eralede Lausanne, Lausanne, Switzerland, 1998.
  16. [16] K. Abdel-Malek, J. Yang, R. Brand, & E. Tanbour, Towardsunderstanding the workspace of the upper extremities, Proc.2001 SAE Digital Human Modeling for Design and Engineering,2001-01-2095, June 26–28, Arlington, VA, USA, 2001.
  17. [17] E. Kreighbaum & K. Barthels, Biomechanics: A qualitativeapproach for studying human movement, 4th ed. (San Francisco:Benjamin/Cummings, 1995).
  18. [18] D.L. Pieper, The kinematics of manipulators under computercontrol, Stanford Artificial Intelligence Laboratory, StanfordUniversity, 1968.
  19. [19] A.E. Engin, On the theoretical modeling of human joints,in J.R. Avula (Ed.), Mathematical modelling in science andtechnology (New York: Pergamon, 1984), 560–565.
  20. [20] A.E. Engin & S.T. Tumer, Three-dimensional kinematic mod-eling of the human shoulder complex, I: Physical model anddetermination of joint sinus cones, Journal of BiomechanicalEngineering, 111, 1989, 107–112.
  21. [21] A.E. Engin & S.T. Tumer, Three-dimensional kinematic mod-eling of the human shoulder complex, II: Mathematical mod-elling and solution via optimization, Journal of BiomechanicalEngineering, 111, 1989, 113–121.
  22. [22] E.Y.S. Chao, J.D. Lynch, & M.J. Vanderploeg, Simulationand animation of musculoskeletal joint systems, Journal ofBiomechanical Engineering, 115, 1993, 562–568. doi:10.1115/1.2895541
  23. [23] R. Raikova, A general approach for modelling and mathe-matical investigation of the human upper limb, Journal ofBiomechanics, 25, 1992, 857–867. doi:10.1016/0021-9290(92)90226-Q
  24. [24] F.C.T. van der Helm, A finite element musculoskeletal modelof the shoulder mechanism, Journal of Biomechanics, 27, 1994,551–569. doi:10.1016/0021-9290(94)90065-5
  25. [25] J. Denavit & R.S. Hartenberg, A kinematic notation forlower-pair mechanisms based on matrices, Journal of AppliedMechanics, ASME, Vol. 22, 1955, 215–221.
  26. [26] C.C. Norkin D.J. White, Measurement of joint motion: Aguide to goniometry, 2nd ed. (Philadelphia: F.A. Davis, 1995).
  27. [27] K. Abdel-Malek & H.J. Yeh, Analytical boundary of theworkspace for general three degree-of-freedom mechanisms,International Journal of Robotics Research, 16(2), 1997, 198–213. doi:10.1177/027836499701600206
  28. [28] K. Abdel-Malek & H.J. Yeh, Path trajectory verification forrobot manipulators in a manufacturing environment, IMechEJournal of Engineering Manufacture, 211, 1997, 547–556. doi:10.1243/0954405971516491
  29. [29] K. Abdel-Malek, F. Adkins, H.J. Yeh, & E.J. Haug, Onthe determination of boundaries to manipulator workspaces,Robotics and Computer-Integrated Manufacturing, 13 (1), 1997,63–72. doi:10.1016/S0736-5845(96)00023-3
  30. [30] K. Abdel-Malek, H.J. Yeh, & N. Khairallah, Workspace, void,and volume determination of the general 5DOF manipulator,Mechanics of Structures and Machines, 27 (1), 1999, 91–117.
  31. [31] K. Abdel-Malek & H.J. Yeh, Crossable surfaces of roboticmanipulators with joint limits, ASME Journal of MechanicalDesign, 122(1), 2000, 52–61. doi:10.1115/1.533545
  32. [32] G. Farin, Curves and surfaces for CAGD: A practical guide(San Francisco: Academic Press, 1988).
  33. [33] D. Blackmore, M.C. Leu, L.P. Wang, & H. Jiang, Sweptvolumes: a retrospective and prospective view, Neural, Parallel& Scientific Computations, 5, 1997, 81–102.

Important Links:

Go Back