DIRECT-DRIVE OUTER-ROTOR PERMANENT MAGNET SYNCHRONOUS MOTOR FOR A TRACTION MACHINE, 97-105.

Tianfang Cai, Zhongguo Yang, Wei Li, and Shuai Yin

References

  1. [1] X. Shi, X. Zhu, and J. Zhang, Simulation and experimentalanalysis of drive motor stator current under local fault of gear,Mechatronic Systems and Control, 49(2), 2021, 74–82. DOI:10.2316/J.2021.201-0124
  2. [2] J. Tavoosi, A novel recurrent type-2 fuzzy neural networkfor stepper motor control, Mechatronic Systems and Control,49(1), 2021, 30–35. DOI: 10.2316/J.2021.201-0097
  3. [3] Y.-H. Hwang and J. Lee, HEV motor comparison ofIPMSM with Nd sintered magnet and heavy rare-Earthfree injection magnet in the same size, IEEE Transactionson Applied Superconductivity, 28(3), 2018, 1–5. DOI:10.1109/TASC.2018.2807377
  4. [4] J.J. Du, X.Y. Wang, H.Y. Lv, and L.H. Zhu, Permanentmagnet reduction of IPMSM on efficiency map simulation,Proc. IEEE Int. Conf. on Applied Superconductivity andElectromagnetic Devices (ASEMD), Shanghai, 2015, 547–548.DOI: 10.1109/ASEMD.2015.7453698
  5. [5] H.-C. Jung, G.-J. Park, D.-J. Kim, and S.-Y. Jung, Optimaldesign and validation of IPMSM for maximum efficiencydistribution compatible to energy consumption areas of HD-EV, IEEE Transactions on Magnetics, 53(6), 2017, 1–4. DOI:10.1109/TMAG.2017.2660524
  6. [6] V.S. Murty, S. Jain, and A. Ojha, Suitability of linearswitched reluctance motor for advanced electric traction system,Mechatronic Systems and Control, 49(3), 2021, 142–148. DOI:10.2316/J.2021.201-0191
  7. [7] D. Wu, W. Fei, and P.C.-K. Luk, Design optimizations of outer-rotor permanent magnet synchronous machines with fractional-slot and concentrated-winding configurations in lightweightelectric vehicles, Proc. 6th Int. Conf. on Power ElectronicsSystems and Applications (PESA), Hong Kong, 2015, 1–8.DOI: 10.1109/PESA.2015.7398956
  8. [8] N. Bianchi, M.D. Pr´e, G. Grezzani, and S. Bolognani,Design considerations on fractional-slot fault-tolerant syn-chronous motors, Proc. IEEE Int. Conf. on ElectricMachines and Drives, San Antonio, TX, 2005, 902–909. DOI:10.1109/IEMDC.2005.195829
  9. [9] A.G. Sarigiannidis, M.E. Beniakar, P.E. Kakosimos, A.G.Kladas, L. Papini, and C. Gerada, Fault tolerant design offractional slot winding permanent magnet aerospace actuator,IEEE Transactions on Transportation Electrification, 2(3),2016, 380–390. DOI: 10.1109/TTE.2016.2574947
  10. [10] Y. Fan, S. Chen, C. Tan, and M. Cheng, Design andinvestigation of a new outer-rotor IPM motor for EV andHEV in-wheel propulsion, Proc. 19th Int. Conf. on ElectricalMachines and Systems (ICEMS), Chiba, 2016, 1–4.
  11. [11] Y. Huang, Z. Zhu, H. Lin, and B. Guo, Development ofhigh torque low speed fractional-slot concentrated windingsPMSM for traction application, Proc. IEEE Vehicle Powerand Propulsion Conf. (VPPC), Hangzhou, 2016, 1–6. DOI:10.1109/VPPC.2016.7791666
  12. [12] J. Le Besnerais, G. Brando, A. Dannier, A. Del Pizzo, L.P.Di Noia, R. Rizzo, L. Castellini, and M. D’Andrea, Analysisof noise reduction in a low speed and high torque PMSMwith tooth concentrated windings, Proc. 11th Int. Conf. onEcological Vehicles and Renewable Energies (EVER), MonteCarlo, 2016, 1–6. DOI: 10.1109/EVER.2016.7476351
  13. [13] X. Yanliang and S. Yuanyuan, Fractional-slot low speed largetorque permanent magnet brushless motors, Proc. 4th IEEEConf. on Industrial Electronics and Applications, Xi’an, 2009,3565–3569. DOI: 10.1109/ICIEA.2009.5138870
  14. [14] Y. Huang, Z. Zhu, B. Guo, H. Lin, and S. Fang, Designand thermal analysis on high torque low speed fractional-slotconcentrated windings in-wheel traction motor, Proc. 22ndInt. Conf. on Electrical Machines (ICEM), Lausanne, 2016,1487–1492. DOI: 10.1109/ICELMACH.2016.7732720
  15. [15] M. Ashabani and Y.A.-R.I. Mohamed, Multiobjective shapeoptimization of segmented pole permanent-magnet syn-chronous machines with improved torque characteristics, IEEETransactions on Magnetics, 47(4), 2011, 795–804. DOI:10.1109/TMAG.2010.2104327
  16. [16] S. Ekanayake, R. Dutta, M.F. Rahman, and D. Xiao,Direct torque and flux control of interior permanent magnetsynchronous machine in deep flux-weakening region, IETElectric Power Applications, 12(1), 2018, 98–105.
  17. [17] A. Ghasemi, Cogging torque reduction and optimizationin surface-mounted permanent magnet motor using magnetsegmentation method, Electric Power Components andSystems, 42(12), 2014, 1239–1248. https://doi.org/10.1080/15325008.2014.893548
  18. [18] D. Barman, S. Sengupta, and T.K. Bhattacharya, Coggingtorque reduction in surface mounted permanent magnet syn-chronous machine, Proc. IEEE Int. Conf. on Power Electronics,Drives and Energy Systems (PEDES), Trivandrum, 2016, 1–5.DOI: 10.1109/PEDES.2016.7914505
  19. [19] S.Q.A. Shah, T.A. Lipo, and B.-I. Kwon, Modeling of novelpermanent magnet pole shape SPM motor for reducing torquepulsation, IEEE Transactions on Magnetics, 48(11), 2012,4626–4629. DOI: 10.1109/TMAG.2012.2197188
  20. [20] W. Zhao, T.A. Lipo, and B.-I. Kwon, Material-efficientpermanent-magnet shape for torque pulsation minimization inspm motors for automotive applications, IEEE Transactionson Industrial Electronics, 61(10), 2014, 5779–5787. DOI:10.1109/TIE.2014.2301758
  21. [21] S.R. Monjezi, A. Kiyoumarsi, B.M. Dehkordi, M.-F. Sabahi,and M.-H. Vafaie, Shape design optimization of inte-rior permanent-magnet synchronous motor with Machaonflux barriers for reduction of torque pulsation, ElectricPower Components and Systems, 44(19), 2016, 2212–2223.https://doi.org/10.1080/15325008.2016.1199611
  22. [22] H. Hong and J. Yoo, Shape design of the surfacemounted permanent magnet in a synchronous machine, IEEETransactions on Magnetics, 47(8), 2011, 2109–2117. DOI:10.1109/TMAG.2011.2128338
  23. [23] D. Faustner, W. Kemmetm¨uller, and A. Kugi, Magneticequivalent circuit modeling of a saturated surface-mounted per-manent magnet synchronous machine, IFAC-Papers OnLine,48(1), 2015, 360–365. https://doi.org/10.1016/j.ifacol.2015.05.033
  24. [24] D. Faustner, W. Kemmetm¨uller, and A. Kugi, Flatness-based torque control of saturated surface-mounted perma-nent magnet synchronous machines, IEEE Transactions onControl Systems Technology, 24(4), 2016, 1201–1213. DOI:10.1109/TCST.2015.2501345
  25. [25] B. Boazzo, G. Pellegrino, and A. Vagati, Multipolar SPMmachines for direct-drive application: A general designapproach, IEEE Transactions on Industry Applications, 50(1),2014, 327–337. DOI: 10.1109/TIA.2013.2271291104
  26. [26] H.U. Wurgler, The world’s first gearless mill drive, IEEETransactions on Industry and General Applications, IGA-6(5),524–527, 1970. DOI: 10.1109/TIGA.1970.4181225

Important Links:

Go Back