Venkatesan Vellaiyan, Shanmugam Subramaniam, and Veerappan Arunachalam


  1. [1] H. Banerjee, Z.T.H. Tse, and H. Ren, Soft robotics withcompliance and adaptation for biomedical applications andforthcoming challenges, International Journal of Robotics andAutomation, 33(1), 2018, 69–79.
  2. [2] K.Y. Wang, L.X. Zhang, H. Meng, et al., Mechanisms forrigid-exible gait rehabilitation robot, International Journal ofRobotics and Automation, 28(4), 2013, 311–316.
  3. [3] B. Wang, A. McDaid, T. Giffney, M. Biglari-Abhari, and K.C.Aw, Design, modelling and simulation of soft grippers using newbimorph pneumatic bending actuators, Cogent Engineering,4(1), 2017, 1–11.
  4. [4] W. Felt, Folded-tube soft pneumatic actuators for bending,Soft Robotics, 6(2), 2019, 174–183.
  5. [5] J. Li, L. Zu, G. Zhong, M. He, H. Yin, and Y. Tan, Stiff-ness characteristics of soft finger with embedded SMA fibers,Composite Structures, 160, 2017, 758–764.
  6. [6] N. An, M. Li, and J. Zhou, Modeling and understandinglocomotion of pneumatic soft robots, Soft Materials, 16(3),2018, 151–159.
  7. [7] C. Sun, L. Chen, J. Liu, J.S. Dai, and R. Kang, A hybridcontinuum robot based on pneumatic muscles with embeddedelastic rods, Proceedings of the Institution of Mechanical En-gineers, Part C: Journal of Mechanical Engineering Science,234(1), 2020, 318–328.
  8. [8] S.W. Lee, D.J. Kim, Y. Ahn, and Y.G. Chai, Simple structuredpolydimethylsiloxane microvalve actuated by external air pres-sure, Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science, 220(8),2006, 1283–1288.
  9. [9] D. Rus and M.T. Tolley, Design, fabrication and control ofsoft robots, Nature, 521(May), 2015, 467.
  10. [10] P. Moseley, J.M. Florez, H.A. Sonar, G. Agarwal, W. Curtin,and J. Paik, Modeling, design, and development of soft pneu-matic actuators with finite element method, Advanced Engi-neering Materials, 18(6), 2016, 978–988.
  11. [11] Y. Nishioka, M. Uesu, H. Tsuboi, S. Kawamura, W. Masuda,T. Yasuda, and M. Yamano, Development of a pneumatic softactuator with pleated inflatable structures, Advanced Robotics,31(14), 2017, 753–762.
  12. [12] H. Huang, L. Wu, J. Lin, B. Fang, and F. Sun, A novelmode controllable hybrid valve pressure control method forsoft robotic gripper, International Journal of Advanced RoboticSystems, 15(5), 2018, 1–12.
  13. [13] A. Dameitry, and H. Tsukagoshi, Lightweight pneumatic semi-universal hand with two fingers aimed for a wide range ofgrasping, Advanced Robotics, 31(23–24), 2017, 1253–1266.
  14. [14] B. Mosadegh, P. Polygerinos, C. Keplinger, S. Wennstedt, R.F.Shepherd, U. Gupta, J. Shim, K. Bertoldi, C.J. Walsh, andG.M. Whitesides, Pneumatic networks for soft robotics thatactuate rapidly, Advanced Functional Materials, 24(15), 2014,2163–2170.
  15. [15] D. Saravanakumar, B. Mohan, T. Muthuramalingam, and G.Sakthivel, Performance evaluation of interconnected pneumaticcylinders positioning system, Sensors & Actuators: A. Physical,274(1), 2018, 155–164.
  16. [16] D. Saravanakumar, B. Mohan, and T. Muthuramalingam, Areview on recent research trends in servo pneumatic positioningsystems, Precision Engineering, 49(1), 2017, 481–492.
  17. [17] P. Chattopadhyay and S.K. Ghoshal, Adhesion technologies ofbio-inspired climbing robots: A survey, International Journalof Robotics and Automation, 33(6), 2018, 654–661.398
  18. [18] J. Zhang, H. Guo, T. Wang, and J. Hong, The design andmotion analysis of a pneumatic omnidirectional soft robot,International Journal of Robotics and Automation, 32(6),2017, 569–576.
  19. [19] Y. Wang, J. Xiao, and X. Chen, New structure of pneu-matic networks actuators for soft robotics, The Journal ofEngineering, 2019(13), 2019, 273–277.
  20. [20] O. Byrne, F. Coulter, M. Glynn, J.F.X. Jones, A.N. Annaidh,E.D. O’Cearbhaill, and D.P. Holland, Additive manufacture ofcomposite soft pneumatic actuators, Soft Robotics, 5(6), 2018,726–736.
  21. [21] K. Elgeneidy, N. Lohse, and M. Jackson, Bending angle pre-diction and control of soft pneumatic actuators with embed-ded flex sensors – A data-driven approach, Mechatronics,50(September 2017), 2018, 234–247.
  22. [22] S. Wakimoto, K. Suzumori, and K. Ogura, Miniature pneumaticcurling rubber actuator generating bidirectional motion withone air-supply tube, Advanced Robotics, 25(9–10), 2011, 1311–1330.
  23. [23] Z. Wang, M.Z.Q. Chen, and J. Yi, Soft robotics for engineers,HKIE Transactions Hong Kong Institution of Engineers, 22(2),2015, 88–97.
  24. [24] P. Polygerinos, S. Lyne, Z. Wang, L.F. Nicolini, B. Mosadegh,G.M. Whitesides, and C.J. Walsh, Towards a soft pneumaticglove for hand rehabilitation, IEEE International Conferenceon Intelligent Robots and Systems, 2013, 1512–1517.
  25. [25] A. Al-Ibadi, S. Nefti-Meziani, and S. Davis, Design, imple-mentation and modelling of the single and multiple exten-sor pneumatic muscle actuators, Systems Science and ControlEngineering, 6(1), 2018, 80–89.
  26. [26] M. Wiese, G. Runge-Borchert, and A. Raatz, Optimization ofneural network hyperparameters for modeling of soft pneumaticactuators, Mechanisms and Machine Science, 65, 2019, 199–206.
  27. [27] W. Hu, R. Mutlu, W. Li, and G. Alici, A structural optimisationmethod for a soft pneumatic actuator, Robotics, 7(2), 2018,1–16.
  28. [28] L. Shi, S. Guo, M. Li, S. Mao, N. Xiao, B. Gao, Z. Song,and K. Asaka, A novel soft biomimetic microrobot with twomotion attitudes, Sensors (Basel, Switzerland), 12(12), 2012,16732–16758.
  29. [29] H. Li, G. Go, S.Y. Ko, J.-O. Park, and S. Park, Magneticactuated PH-responsive hydrogel-based soft micro-robot fortargeted drug delivery, Smart Materials and Structures, 25(2),2016, 27001.
  30. [30] E. Brown, N. Rodenberg, J. Amend, A. Mozeika, E. Steltz,M.R. Zakin, H. Lipson, and H.M. Jaeger, Universal roboticgripper based on the jamming of granular material, Proceedingsof the National Academy of Sciences, 107(44), 2010, 18809–18814.
  31. [31] K.M. de Payrebrune, and O.M. O’Reilly, On the development ofrod-based models for pneumatically actuated soft robot arms:A five-parameter constitutive relation, International Journalof Solids and Structures, 120, 2017, 1339–1351.
  32. [32] Z. Wang, M. Zhu, S. Kawamura, and S. Hirai, Comparison ofdifferent soft grippers for lunch box packaging, Robotics andBiomimetics, 4(1), 2017, 1–9.
  33. [33] A. Miriyev, K. Stack, and H. Lipson, Soft material for softactuators, Nature Communications, 8(1), 2017, 1–8.
  34. [34] Y. Liu, Z. Ge, S. Yang, I.D. Walker, and Z. Ju, Elephant’strunk robot: An extremely versatile under-actuated continuumrobot driven by a single motor, Journal of Mechanisms andRobotics, 11(5), 2019, 1–17.
  35. [35] A.D. Marchese, R.K. Katzschmann, and D. Rus, A recipe forsoft fluidic elastomer robots, Soft Robotics, 2(1), 2015, 7–25.
  36. [36] K.-J. Cho, J.-S. Koh, S. Kim, W.-S. Chu, Y. Hong, and S.-H.Ahn, Review of manufacturing processes for soft biomimeticrobots, International Journal of Precision Engineering andManufacturing, 10(3), 2009, 171–181.
  37. [37] A. Zolfagharian, A.Z. Kouzani, S.Y. Khoo, A.A.A. Moghadam,I. Gibson, and A. Kaynak, Evolution of 3D printed softactuators, Sensors and Actuators, A: Physical, 250(October),2016, 258–272.
  38. [38] L. Ge, L. Dong, D. Wang, Q. Ge, and G. Gu, A digital lightprocessing 3D printer for fast and high-precision fabrication ofsoft pneumatic actuators, Sensors and Actuators A: Physical,273(April), 2018, 285–292.
  39. [39] W.I. Herianto, A.S. Ritonga, and A. Prastowo, Design andfabrication in the loop of soft pneumatic actuators using fuseddeposition modelling, Sensors and Actuators A: Physical, 298,2019, 1–8.
  40. [40] L. Chen, C. Yang, H. Wang, D.T. Branson, J.S. Dai, andR. Kang, Design and modeling of a soft robotic surfacewith hyperelastic material, Mechanism and Machine Theory,130(December), 2018, 109–122.
  41. [41] D.P. Holland et al., Soft robotics toolkit, Harvard Biode-sign Lab, (accessed Jan. 15, 2017).
  42. [42] G. Alici, T. Canty, R. Mutlu, W. Hu, and V. Sencadas,Modeling and experimental evaluation of bending behavior ofsoft pneumatic actuators made of discrete actuation chambers,Soft Robotics, 5(1), 2018, 24–35.
  43. [43] C. Yang, R. Kang, D.T. Branson, L. Chen, and J.S. Dai,Kinematics and statics of eccentric soft bending actuators withexternal payloads, Mechanism and Machine Theory, 139, 2019,526–541.

Important Links:

Go Back