ORIENTATION OPTIMIZATION OF CABLE-DRIVEN PARALLEL MANIPULATOR FOR CLEANING THE DEEP SEA FISHING GROUND, 347-354.

Zhufeng Shao, Haisheng Li, Liping Wang, Zhaokun Zhang, Rui Yao, and Jinbo Qie

References

  1. [1] K. Sun and L.D. Li, Analysis on the effect and time-space differences of China’s marine fisheries transformation, Economic Review, 7(4), 2018, 72–83.
  2. [2] H. Jamshidifar, A. Khajepour, B. Fidan, and M. Rushton, Kinematically-constrained redundant cable-driven parallel robots: Modeling, redundancy analysis, and stiffness optimization, IEEE/ASME Transactions Mechatronics, 22(2), 2017, 921–930.
  3. [3] S. Qian, B. Zi, and W.W. Shang, A review on cable-driven parallel robots, Chinese Journal of Mechanical Engineering, 30(1), 2018, 31–36.
  4. [4] X. Liu, Y.Y. Qiu, and Y. Sheng. Stiffness enhancement and motion control of a 6-dof wire-driven parallel manipulator with redundant actuations for wind tunnels, Acta Aeronautica et Astronautica Sinica, 30(6), 2009, 1156–1164. 352
  5. [5] Y.D. Zhang, J.G. Jiang, S. Zhang, C.L. Luo, and Y. Chen, Development and experimental study on glass-curtain wall cleaning robot driven by flexible rope, Chinese Journal of Scientific Instrument, 34(3), 2013, 494–501.
  6. [6] Z.Y. Liu, L. Chen, Z.F. Shao, L.P. Wang, and X.Q. Tang, Terminal accuracy of the feed support system in FAST, Journal of Mechanical Engineering, 53(17), 2017, 50–59.
  7. [7] X.Q. Tang, X.M. Chai, L.W. Tang, and Z.F. Shao, Accuracy synthesis of a multi-level hybrid positioning mechanism for the feed support system in FAST, Robotics and Computer-Integrated Manufacturing, 30(5), 2014, 565–575.
  8. [8] M. Gouttefarde, J.F. Collard, N. Riehl, and C. Baradat, Geometry selection of a redundantly actuated cable-suspended parallel robot, IEEE Transactions on Robotics, 31(2), 2017, 501–510.
  9. [9] L.L. Cone, Skycam: An aerial robotic camera system, Byte, 10(10), 1985, 122.
  10. [10] L. Kevac, M. Filipovic, and A. Rakic, Contribution to modelling the cable-suspended parallel robot intended for application in greenhouses, International Journal of Robotics and Automation, 33(2), 2018, 194–201.
  11. [11] B.H. Xia, Z.S. Chen, and T.L. Li, Construction control of a long span light urban rail transit cable-stayed bridge: A case study, International Journal of Robotics and Automation, 32(3), 2017, 274–282.
  12. [12] R. Verhoeven, Analysis of the workspace of Tendon-based Stewart platforms, Doctoral Dissertation, University Duisburg-Essen, Essen, 2004.
  13. [13] A. Riechel, P. Bosscher, H. Lipkin, and I. Ebert-Uphoff, Concept paper: Cable-driven robots for use in hazardous environments, Proc. of the 10th Int. Topical Meeting on Robotics and Remote Systems for Hazardous Environments, Gainesville, FL, 2004, 1–7.
  14. [14] X.L. Jiang and C. Gosselin, Trajectory generation for three-degree-of-freedom cable-suspended parallel robots based on analytical integration of the dynamic equation, Journal of Mechanisms and Mechanisms and Robotics Transactions of the ASME, 8(4), 2015, 041001.
  15. [15] Y.J. Zhang, Y.R. Zhang, and X.W. Dai, Optimal design for planar cable-driven parallel mechanism with respect to maximizing workspace, Journal of Mechanical Engineering, 47(13), 2011, 29–34.
  16. [16] Y.J. Zhang, Y.R. Zhang, H. Li. Dexterous Workspace analysis of planar cable-driven parallel mechanism and configuration optimization, Machine Design and Research, 27(4), 2011, 13–16.
  17. [17] R. Yao, Study on tension characteristic and dimensional synthetic design of cable driven parallel manipulators with large span, Doctoral Dissertation, Tsinghua University, Beijing, 2010.
  18. [18] H. Li and R. Yao, Optimal orientation planning and control deviation estimation on FAST cable-driven parallel robot, Advances in Mechanical Engineering, 2014, 1–7.
  19. [19] S.Q. Fang, D. Franitza, M. Torlo, F. Bekes, and M. Hiller, Motion control of a tendon-based parallel manipulator using optimal tension distribution, IEEE/ASME Transactions on Mechatronics, 9(3), 2004, 561–568.
  20. [20] T. Bruckmann, A. Pott, D. Franitza, and M. Hiller, A modular controller for redundantly actuated tendon-based Stewart platforms, Proc. of Eur. Conf. on Mechanism Science, Obergurgl, Austria, 2006, 1–12.
  21. [21] C. Gosselin and M. Grenier, On the determination of the force distribution in overconstrained cable-driven parallel mechanisms, Meccanica, 46(1), 2011, 3–15.
  22. [22] W.B. Lim, S.H. Yeo, and G.L. Yang, Optimization of tension distribution for cable-driven manipulators using tension-level index, IEEE/ASME transactions on Mechatronics, 19(2), 2014, 676–683.
  23. [23] C.B. Pham, S.H. Yeo, G. Yang, et al., Force-closure workspace analysis of cable-driven parallel mechanisms, Mechanism and Machine Theory, 41(1), 2006, 53–69.
  24. [24] X.Q. Tang, L.W. Tang, J.S. Wang, and D.F. Sun, Workspace quality analysis and application for a completely restrained 3-Dof planar cable-driven parallel manipulator, Journal of Mechanical Science and Technology, 27(8), 2013, 2391–2399.
  25. [25] Q.J. Duan, Q.H. Li, F. Li, and X.C. Duan, Analysis of the Workspace of the Cable-spring Mechanism, Journal of Mechanical Engineering, 52(15), 2016, 15–20.

Important Links:

Go Back