INFLUENCE OF FREQUENCY CONVERSION ON MATERIAL MASS OF PARTICIPATING IN VIBRATION IN VIBRATING FEEDER, 194-198.

Lingling Li, Bingjiang Guo, Zhenghai Liu, and Xuedong Ma

References

  1. [1] F.K. Mulenga and M.A. Moys, Effects of slurry filling and mill speed on the net power draw of a tumbling ball mill, Minerals Engineering, 56, 2014, 45–56.
  2. [2] V. Deniz and T. Onur, Investigation of the breakage kinetics of pumice samples as dependent on powder filling in a ball mill, International Journal of Mineral Processing, 67, 2012, 71–78.
  3. [3] Y. Huang, J. Li, T. Song, et al., Analysis on filling ratio and shield supporting pressure for overburden movement control in coal mining with compacted backfilling, Energies, 10(1), 2016, 31.
  4. [4] A. Katterfeld, T. Donohue, and D. Ilic, Application of the discrete element method in mechanical conveying of bulk materials, 7th International Conference for Conveying and Handling of Particulate Solids (ChoPS), 2012, 7(2012.09), 10–13. At Friedrichshafen.
  5. [5] W. Gao, L. Liu, Z. Liao, et al., Discrete element analysis of the particle mixing performance in a ribbon mixer with a double U-shaped vessel, Granular Matter, 21(1), 2019, 12.
  6. [6] T. Groger and A. Katterfeld, Application of the discrete element method in materials handling, Part 1: Basics and calibration, Bulk Solids Handling, 27(1), 2007, 17–23.
  7. [7] J.M. Boac, R.P.K. Ambrose, M.E. Casada, et al., Applications of discrete element method in modeling of grain postharvest operations, Food Engineering Reviews, 6(4), 2014, 128–149.
  8. [8] D.N. Wilke, N. Govender, R.K. Rajamani, et al., Geometric design of tumbling mill lifter bars utilizing the discrete element method, World Congress of Structural and Multidisciplinary Optimisation (Cham: Springer, 2017), 878–888.
  9. [9] E. Kermani, T. Li, and T. Qiu, Discrete element method simulation of granular column collapse, Advances in Transportation Geotechnics and Materials for Sustainable Infrastructure, 2014, 1–8.
  10. [10] M. Alian and F. Ein-Mozaffari, Analysis of the Mixing of Solid Particles in a Ploughshare Mixer via Discrete Element Method (DEM) (Toronto, ON: Ryerson University, 2013).
  11. [11] H. Tao, B. Jin, W. Zhong, et al., Discrete element method modeling of non-spherical granular flow in rectangular hopper, Chemical Engineering and Processing: Process Intensification, 49(2), 2010, 151–158.
  12. [12] S.S. Behbahani, P. Moarefvand, K. Ahangari, et al., Unloading scheme of Angooran mine slope by discrete element modeling, International Journal of Rock Mechanics and Mining Sciences, 64, 2013, 220–227.
  13. [13] H. Li, J. Wang, J. Yuan, et al., Analysis of threshed rice mixture separation through vibration screen using discrete element method, International Journal of Agricultural & Biological Engineering, 10(6), 2017, 231–239.
  14. [14] H. Kruggelemden and F. Elskamp, Numerical investigation of a continuous screening process by the discrete element method, International Conf. of Numerical Analysis & Applied Mathematics, AIP Publishing LLC, 2015, 42–49.
  15. [15] L.X. Xiong, Z.Y. Xu, T.B. Li, et al., Bonded-particle discrete element modeling of mechanical behaviors of interlayered rock mass under loading and unloading conditions, Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 5(1), 2019, 1–16.
  16. [16] F. Elskamp, H. Kruggel-Emden, M. Hennig, et al., Discrete element investigation of process models for batch screening under altered operational conditions. Powder Technology, 301, 2016, 78–95.
  17. [17] F. Elskamp, H. Kruggel-Emden, M. Hennig, et al., Benchmarking of process models for continuous screening based on discrete element simulations, Minerals Engineering, 83(3), 2015, 78–96.
  18. [18] A. Ahmed and N. Iqbal, Adaptive anti-windup controller for actuator constrained linear control systems, Mechatronic Systems and Control, 45(1), 2017. DOI: 10.2316/ Journal.201.2017.1.201-2769.
  19. [19] P.J. Owen and P.W. Cleary, Prediction of screw conveyor performance using the Discrete Element Method (DEM), Powder Technology, 193(3), 2009, 274–288.
  20. [20] T.J. Li, H. Zhang, M.L. Liu, et al., DEM study of granular discharge rate through a vertical pipe with a bend outlet in small absorber sphere system, Nuclear Engineering and Design, 314, 2017, 1–10.
  21. [21] X.D. Ma, Y.B. Zhang, Y. Liu, et al., Simulation of grain segregation under horizontal rotational oscillations, Granular Matter, 18(8), 2016, 1–8.
  22. [22] Q. Wang, L. Gao, Y. Yang, J. Zhao, T. Dou, and H. Fang, A load-balanced algorithm for multi-controller placement in software-defined network, Mechatronic Systems and Control, 46(2), 2018. DOI: 10.2316/Journal.201.2018.2.201-2975.
  23. [23] D.R. Alberto and P.D.M. Francesco, Comparison of contact- force models for the simulation of collisions in DEM-based granular flow codes, Chemical Engineering Science, 59(3), 2004, 525–541.
  24. [24] P.A. Langston, U. Tuzun, and D.M. Heyes, Discrete element simulation of granular flow in 2D and 3D hoppers: Dependence of discharge rate and wall stress on particle interactions, Chemical Engineering Science, 50(6), 1995, 967–987.
  25. [25] Y.C. Zhou, B.D. Wright, R.Y. Yang, et al., Rolling friction in the dynamic simulation of sandpile formation, Physica A, 269(2–4), 1999, 536–553.

Important Links:

Go Back