DESIGN OF FAST OUTPUT SAMPLING FEEDBACK CONTROL FOR SMART STRUCTURE MODEL

M. Umapathy and B. Bandyopadhyay

References

  1. [1] S. Hanagud, M.W. Obal, & A.J. Callise, Optimal vibrationcontrol by the use of piezoceramic sensors and actuators,Journal of Guidance, Control, and Dynamics, 15 (5), 1992,1199–1206.
  2. [2] M.H. Shen, Analysis of beams containing piezoelectric sensorsand actuators, Smart Materials and Structures, 3, 1994, 439–447. doi:10.1088/0964-1726/3/4/006
  3. [3] W. Hwang & H.C. Park, Finite element modelling of piezo-electric sensors and actuators, AIAA Journal, 31 (5), 1993,930–937.
  4. [4] S.M. Yang & Y.J. Lee, Optimization of non-collocated sensor/actuator location and feedback gain in Control Systems,Smart Materials and Structures, 2, 1993, 96–102. doi:10.1088/0964-1726/2/2/005
  5. [5] H. Allik & T.J.R. Hughes, Finite element method for piezoelectric vibration, International Journal for Numerical Methodsin Engineering, 2, 1970, 151–157. doi:10.1002/nme.1620020202
  6. [6] R.C. Shieh, Governing equations and finite element modelsfor multiaxial piezoelectric beam sensors/actuators, AIAAJournal, 32 (6), 1994, 1250–1258.50
  7. [7] Y.-H. Lim, V.V. Varadan, & V.K. Varadan, Closed loop finiteelement modelling of active structural damping in the timedomain, Smart Materials and Structures, 8, 1999, 390–400. doi:10.1088/0964-1726/8/3/310
  8. [8] S. Narayanan & V. Balamurugan, Finite element modellingof piezolaminated smart structures for active vibration controlwith distributed sensors and actuators, Journal of Sound andVibration, 262 (5), 2003, 529–562. doi:10.1016/S0022-460X(03)00110-X
  9. [9] S.M. Yang & Y.J. Lee, Modal analysis of stepped beamswith piezoelectric materials, Journal of Sound and Vibration,176 (3), 1994, 289–300. doi:10.1006/jsvi.1994.1377
  10. [10] O.J. Aldraihem, T. Singh, & R.C. Wetherhold, Optimal sizeand location of piezoelectric actuator/sensors: Practical considerations, Journal of Guidance, Control, and Dynamics,23 (3), 2000, 509–515.
  11. [11] S.M. Yang & Y.J. Lee, Vibration suppression with optimalsensor/actuator location and feedback gain, Smart Materialsand Structures, 2, 1993, 232–239. doi:10.1088/0964-1726/2/4/004
  12. [12] A. Blanguernon, F. Lene, & M. Bernadou, Active control ofa beam using a piezoceramic element, Smart Materials andStructures, 8, 1999, 116–124. doi:10.1088/0964-1726/8/1/013
  13. [13] J.L. Fanson & T.K. Caughey, Positive position feedback controlfor large space structures, AIAA Journal, 18 (4), 1990, 717–723.
  14. [14] R. Butler & V. Rao, State space modelling and control ofMIMO smart structures, Proc. 34th Conf. on Decision &Control, New Orleans, USA, 1995, 3534–3539. doi:10.1109/CDC.1995.479132
  15. [15] Y.-H. Lim, S.V. Gopinathan, V.V. Varadan, & V.K. Varadan,Finite element simulation of smart structures using an optimaloutput feedback controller for vibration and noise control,Smart Materials and Structures, 8, 1999, 324–337. doi:10.1088/0964-1726/8/3/305
  16. [16] H. Werner & K. Furuta, Simultaneous stabilization based onoutput measurements, Kybernetika, 31 (4), 1995, 395–411.
  17. [17] H. Werner & K. Furuta, Simultaneous stabilization by piece-wise constant periodic output feedback, Control Theory andAdvanced Technology, 10 (4), 1995, 1763–1775.
  18. [18] J.P. Bentley, Principles of measurement systems (London, UK:Addison Wesley Longman Limited, 1995).
  19. [19] H. Werner, Multimodel robust control by fast output sampling:An LMI approach, Automatica, 34 (12), 1998, 1625–1630. doi:10.1016/S0005-1098(98)80018-6

Important Links:

Go Back