Modelling and Simulation    (MS 2007)

May 30 – June 1, 2007
Montreal, QC, Canada
Editor(s): R. Wamkeue
680 pages
Other Years:

Abstracts may contain minor errors and formatting inconsistencies.
Please contact us if you have any concerns or questions.

Track Symposium Communications, Computers, and Informatics FreeSubscription
567-031 Rain Attenuation Modelling for Low Earth Orbiting Satellite Ground Station at S - Band in Europe
S. Cakaj (Kosovo) and K. Malarić (Croatia)
Abstract
567-048 On Alamouti Scheme Performance in Spatially Correlated Fading and Pilot Assisted Channel Prediction
K. Almustafa, S. Primak, and T.J. Willink (Canada)
Abstract
567-054 On the Covariance Function of a Mobile-to-Mobile Communication Link
S. Primak and K. Almustafa (Canada)
Abstract
567-063 Parallel Implementation of Multi-Resolution Models in Distributed Simulation System
B. Liu, J. Hao, and K. Huang (PRC)
Abstract
567-075 Performance Analysis and Simulation of an Equivalent Model of Serial Queues for Computer Networks
C.-P. Chen and Y.-W. Bai (Taiwan)
Abstract
567-114 Anger Filter in Agent Simulation of Human Behavior
N. Ghasem-Aghaee, L. PoorMohamadBagher, M. Kaedi (Iran), and T.I. ren (Canada)
Abstract
567-141 Camera Operation Estimation Algorithm using Low Level Vision in Digital Video
H.C. Lee, Y.W. Chang, J.H. Lee, and O.B. Jang (Korea)
Abstract
567-174 Spam Filtering Improvement of an E-mail Server by the Cooperation of Multi-Filter Firewall and Virtual Networks
Y.-W. Bai and M.-Y. Tsai (Taiwan)
Abstract
567-204 On Static Pricing of Threshold-Policies at a Single Queue
L.-M. Le Ny and B. Tuffin (France)
Abstract
Track Symposium Energy and Power Systems FreeSubscription
567-027 Load Representation Impact on the Damping of Electromechanical Oscillations in Electrical Power Systems
J.G. Calderon-Guizar (Mexico)
Abstract
567-070 Modeling and Simulation of Computational Techniques used in Numerical Protective Relays
T.S. Sidhu, M.D. Zadeh, and M. Vijayasarathi (Canada)
Abstract
567-071 Simulation-based Design of Active Filters
N. Rathle and C.W. Brice (USA)
Abstract
567-072 An Accelerated Zone 2 Trip Algorithm for Non-Pilot Distance Relays
G.R. Ortiz and T.S. Sidhu (Canada)
Abstract
567-076 Numerical Study to Determine Corona Inception Electric Field using a Rod-Plane Configuration
H. Javadi (Iran), A. Peyda, and M. Farzaneh (Canada)
Abstract
567-088 Simulation of Finite-Element Sensitivities for Power Cables in Complex Media
M.S. Al-Saud, M.A. El-Kady, and R.D. Findlay (Canada)
Abstract
567-095 A Simulation Model for Assessing the Uncertainties of Wind Farm Production
G.C. Vineel, A. Sarkar, A. Saha, and A. Anbarasu (India)
Abstract
567-111 On Solar Building Energy Devices
H. Dehra (Canada)
Abstract
567-162 Impact of Wind Generators on the Stability of Power System Network
K.A. Folly and K. Tjiuma (South Africa)
Abstract
Track Symposium Automation, Control, and Robotics FreeSubscription
567-025 An Approach to Beacons Detection for a Mobile Robot using a Neural Network Model
A. Boutarfa, N.-E. Bouguechal (Algeria), and H. Emptoz (France)
Abstract
567-039 Link Space Control for Parallel Machines with Consideration of Dynamics
J.-h. Chin and G.-W. Huang (Taiwan)
Abstract
567-064 Modelling and Simulation for Feedback Control of Welding
F. Sikstrm, A.-K. Christiansson, and B. Lennartson (Sweden)
Abstract
567-069 Structural Vibration Response Analysis of a 3-PRR Flexible Parallel Manipulator Moving with High-Speed
Xuping Zhang, J.K. Mills, and W.L. Cleghorn (Canada)
Abstract
567-097 The Influence of Fastener-Pad Stiffness to the Track Vibration Behavior
C.-M. Kuo, C.-H. Huang, and H.-L. Hsu (Taiwan)
Abstract
567-152 Hardware Simulation of an Adaptive Control Algorithm
S. He and X. Xu (USA)
Abstract
567-167 Statistical Process Control of Electroencephalographs
T. Tsagaroulis and A. Ben Hamza (Canada)
Abstract
567-193 A New Approach on Dynamic Analysis and Control Synthesis of Object Grasping by Manipulators
S.H. Jazi, M. Keshmiri, and F. Sheikholeslam (Iran)
Abstract
567-199 Simulation of a One-Legged Hopping Robot with Phase Plane Stability
A. Sato (Canada)
Abstract
Track Symposium Modelling and Simulation Methodologies FreeSubscription
567-019 Numerical and Experimental Studies of Automotive Connector Behavior
R. El Abdi, N. Benjemaa, and M. Beloufa (France)
Abstract
567-024 Throttled Lazy Cancellation in Time Warp Simulation
H.M.S. Ramadan (Saudi Arabia)
Abstract
567-037 Side Impact Simulation using Reduced Order Finite Element Models
P.R. Marur and S. Srinivas (India)
Abstract
567-053 Chaotic Characteristics of Joint Motions during Normal Gait
S.-M. Ye, K. Son, J.-H. Park, and K.-W. Seo (Korea)
Abstract
567-056 A Restoring Effect of Composite Resins on a Notch-Shaped Non-Carious Cervical Lesion
K.-H. Kim, S.-G. Woo, K. Son, and J.-K. Park (Korea)
Abstract
567-062 Teaching the Simulation Process in an Undergraduate Chemical Reactors Design Course
E. Arce-Medina (Mexico)
Abstract
567-066 Multi Resolution Infrared Optical Properties for Gaussian Sea Surfaces
S. Fauqueux, K. Caillault, C. Bourlier, P. Simoneau, and L. Labarre (France)
Abstract
567-109 Finite Element Bounds for Linear Functionals of Exact Solutions to the Three-Dimensional Poisson's Equation
S. Ghomeshi, Z. Cheng, and M. Paraschivoiu (Canada)
Abstract
567-116 Increasing the Effectiveness of Value Stream Mapping using Simulation Tools in Engine Test Operations
J. Narasimhan, L. Parthasarathy, and P.S. Narayan (USA)
Abstract
567-124 A Model for Interpretation of a Re-Start Experiment of Viscous Oil-Water Annular Flow
A.C. Bannwart, A. Barbosa, and G.S. Ribeiro (Brazil)
Abstract
567-125 Capacity Modelling of the Coal Value Chain at Sasol Coal Supply
M. Harmse and J.J.v. Rensburg (South Africa)
Abstract
567-130 Modeling, Mathematical Simulation and Non-Linear Analysis of Magnetorheological Valve Damper
N. Eslaminasab, T. Gillespie, and M.F. Golnaraghi (Canada)
Abstract
567-136 Simulation of Shear Spinning Process using Finite Element Method
J.-H. Zhao, H. Champliaud, and T.-M. Dao (Canada)
Abstract
567-153 A Simulation of Power-Aware Scheduling of Task Graphs to Multiple Processors
X. Qi, C. Jones, and S. Cannon (USA)
Abstract
567-179 An Accurate and Fast Schrdinger-Poisson Solver using Finite Element Method
M.K. Alam, A. Alam, S. Ahmed, M.G. Rabbani, and Q.D.M. Khosru (Bangladesh)
Abstract
567-184 Thermal Stress in a Functionally Graded Curved Bar
M. Mohammadi and J.R. Dryden (Canada)
Abstract
567-186 Solving the Limitations of Forecasting Time Series Model by Independent Component Analysis Approach
J.-C. Lin, Y.-H. Li, and C.-H. Liu (Taiwan)
Abstract
567-194 Allocation Tolerance by Jacobian-Torsor Model
W. Ghie, L. Laperrirre, D. Nadeau, and A. Desrochers (Canada)
Abstract
567-196 Isothermal Filling of an Injection Molding Cavity Simulated with the Level Set Method
A.E. Varela (Venezuela)
Abstract
567-197 The Maximum Entropy States of 1D Cellular Automata Traffic Models
A. Salcido (Mexico)
Abstract
Track Symposium Modelling, Optimization, and Identification FreeSubscription
567-008 Modeling and Linear Function Parametric Identification for a Helicopter Main Rotor
J.M. Molinar-Monterrubio, R. Castro-Linares (Mexico), and E. Licaga-Castro (Spain)
Abstract
567-055 A Multiple Container Loading Problem based Algorithm for Efficient Allocation of Goods to Vehicles
L. Delaitre (France), A. Awasthi (Canada), H. Molet, and D. Breuil (France)
Abstract
567-084 Power-Density Aware Floorplanning for Reducing Maximum On-Chip Temperature
D. Chatterjee and T.W. Manikas (USA)
Abstract
567-090 Formulation of the Relationship between Tension Loading Rate and Internal Stress for Uni-Axel Bio-Materials
D. Zhou and G. McMurray (USA)
Abstract
567-108 LPV Model Identification Feed-Gas Pre-Heater in Ammonia Plant
R.T. Bambang and H. Subagiyo (Indonesia)
Abstract
567-135 Weighted Intermediate Rank Lattice Rules with Applications in Finance
Y. Lai and K.S. Tan (Canada)
Abstract
567-146 Estimation of the Pressing Force in Blade Forming Application
T. Bellizzi, J. Boisvert, H. Champliaud, and T.-M. Dao (Canada)
Abstract
567-150 Modeling and Identification of a Heated Cylinder from Perturbations in the Drying Contact Surface
S. Prez (Venezuela), N. Thrien, and A.D. Broadbent (Canada)
Abstract
567-166 Dynamic Identification of Inelastic Shear Frames by using Prandtl-Ishlinskii Model
M. Farrokh and A. Joghataie (Iran)
Abstract
567-175 Automotive Body Welding Optimization using Neuro-Genetic Algorithms
M. Hamedi and S.A. Mansourzadeh (Iran)
Abstract
567-177 Anisotropic Laplace Trend to Enhance Software Reliability Growth Modelling
Y. Luo, T. Bergander, and A. Ben Hamza (Canada)
Abstract
567-178 Application of the Interval Method Optimization Technique to Highly Nonlinear Steady State Processes
P. Hajiani, F. Jalali-Farahani, and N. Mostoufi (Iran)
Abstract
Track Symposium Economic, Management, and Operations Research FreeSubscription
567-005 "The Synthesis": Forecasting Corn Cash Prices using a Synthetic Model of Wavelets and SVMs
Y.H. Kaheil, A. Abusharekh, D.V. Bailey, M. McKee, and E. Rosero R. (USA)
Abstract
567-014 Agent based Simulation to Measure the Fairness of User-Pays Air Traffic Management Charging Methodologies
R. Dominick (South Africa)
Abstract
567-043 Building a Parametric 3D Tomato Plant Model using Laser Scans and Field Data
T. Wang, J. Dickinson, S. Lang, S. Khosla, and J. Wu (Canada)
Abstract
567-049 Asymmetric Pricing: An Agent based Model
F. Cecconi and D. Parisi (Italy)
Abstract
567-051 Markovian Heavy-Tailed Signals Fitting for Communications Performance Analysis
P. Amorim, M. Diniz, and R. Coelho (Brazil)
Abstract
567-057 Managing Storage Location and Capacity for Reverse Logistics The Case of Carlsberg Denmark A/S
J. Liangsiri, L. Englyst, and J. Johansen (Denmark)
Abstract
567-117 Integrated Hazards Method (IHM): A New Safety Allocation Technique
D. Falcone, G. Di Bona, V. Duraccio, and A. Silvestri (Italy)
Abstract
567-200 The Model of Structural Reforms as a Base of Economic Policy
D. Maleshkov (Canada)
Abstract
567-205 Risk Modification through System Dynamics Simulation
L. Baliwangi, H. Arima (Japan), K.B. Artana (Indonesia), and K. Ishida (Japan)
Abstract
567-208 A Critical Evaluation of Two Variable Parameter Muskingum Routing Methods
M. Perumal and B. Sahoo (India)
Abstract
Track Symposium Signal Processing and Intelligent Systems FreeSubscription
567-017 Negative Coefficient Polynomial Kernel Density Estimation for Visualization
S.D. Witherspoon and M. Zhang (USA)
Abstract
567-129 Sensitivity Analysis for Type-1 and Type-2 TSK Fuzzy Models
Q. Ren, L. Baron, and M. Balazinski (Canada)
Abstract
567-133 Simulation of Neural Network DTMF Decoder
D.R. Loker and T.L. Hemminger (USA)
Abstract
567-134 Practical Considerations for Extending Network Layer Models with OPNET Modeler
V. Hnatyshin, G. Gramatges, and M. Stiefel (USA)
Abstract
567-138 Non Parametric Identifier for Parkinson's Disease Dynamics by Fuzzy-Genetic Controller
V. Ortiz, C. Yez, . Kuri, R. Miranda, A. Cabrera, and I. Chairez (Mexico)
Abstract
567-145 An Intelligent System for Assessment of Orthodontic Treatment Outcome using Fuzzy Union Rule Configuration
A. Zarei, M. El-Sharkawi, and M. Hairfield (USA)
Abstract
567-149 Modeling of High Speed Vehicle for Path Following and Obstacles Avoidance
N.H.H.M. Hanif and T.Z. Yaw (Malaysia)
Abstract
Track Symposium Applied Mathematics and Numerical Methods FreeSubscription
567-016 A Data Simulation System using YSINC Polynomial Higher Order Neural Networks
M. Zhang (USA)
Abstract
567-028 A Procedure for Face Detection & Recognition
H. Verma, P. Sharma, and V.S. Sharma (India)
Abstract
567-032 Numerical and Experimental Validation of Heat and Mass Transfer during Heat Treatment of Wood
R. Younsi, D. Kocaefe, S. Poncsak, and T. Junjun (Canada)
Abstract
567-067 An Integrated Methodology for Model Checking and Failure Coverage of Fault Tolerant Architectures for By-Wire Systems
M. Supal and R. Debouk (USA)
Abstract
567-073 Reduced Order Modelling based on POD Method for 3D Nonlinear Aeroelasticity
Z. Feng and A. Soulaimani (Canada)
Abstract
567-198 Groebner Bases Computation in Boolean Rings for Symbolic Model Checking
Q. Tran and M.Y. Vardi (USA)
Abstract
567-201 FEM Calculation of Frequencies Variation Caused by Residual Stress Distribution in Welded Structures
O. Charette, H. Champliaud, and M. Thomas (Canada)
Abstract
567-206 A Three Dimensional Numerical Study of Stress Distribution in Bolt-Nut Connections
G.H. Majzoobi, A. Sadri, A. Bayat (Iran), and A.H. Mahmoudi (UK)
Abstract
567-807 Parameter Study of Liquid Flow and Heat Transfer in a Microchannel of Varying Cross-Section
G.D. Ngoma and F. Erchiqui (Canada)
Abstract
Track Special Session 1: Applications in Process and Design Optimization FreeSubscription
567-060 Investigation of Influence of Sliding of Rolls Over Plate on Continuous Bending with Noncompatible Conical Rolls
Z. Feng, H. Champliaud, J. Zeng, and T.-M. Dao (Canada)
Abstract
567-074 GA based Optimization of Manufacturing Cycle Cost
I.M. Deiab (UAE) and M.D.R. Al-Ansary (Kuwait)
Abstract
567-078 Dimensional Stability and Warpage Reduction in Conventional Injection Molding through Process Changes
S.J. Sobolak and B.A. Jawad (USA)
Abstract
567-101 Hybrid Commissioning - From Hardware-in-the-Loop Simulation to Real Production Plants
S. Dominka, F. Schiller, and S. Kain (Germany)
Abstract
567-185 A Hysteresis Approach of Thermal Expansion Effect on Residual Stresses due to Welding
B. Amri, V.N. L, and H. Champliaud (Canada)
Abstract
567-809 Towards a Grid Simulation Platform for Dynamical Systems
Y. Derbal (Canada)
Abstract
567-811 An Optimal Approach to Active Vibration Control of Smart Structures
A.R. Mehrabian, H. Shahi, and A. Yousefi-Koma (Iran)
Abstract
567-821 Shape Efficiency Maps for Optimum Shape Selection in Torsion Stiffness Design
V. Mirjalili and D. Pasini (Canada)
Abstract
567-822 Tolerancing Assistance Methodology in a Product Life Cycle Perspective
M. Khanafer, A. Desrochers, and L. Laperrire (Canada)
Abstract
567-828 A Group Decision Making Approach in Multi-Criteria Material Selection
A.S. Milani (USA), A. Shanian (Canada), and R.C. Abeyaratne (USA)
Abstract
Track Special Session 2: Simulation and Modelling of Transportation Systems FreeSubscription
567-103 Real Time Route Analysis based on Floating Car Technology
M. Reinthaler and J. Zajicek (Austria)
Abstract
567-120 Microscopic Traffic Simulation Modeling Considering Vehicle-to-Vehicle Communication Delays
Y. Liu, F. Dion, and S. Biswas (USA)
Abstract
567-183 Application of Fuzzy Theory for Traffic Assignment
Y. Shafahi and H. Ramezani (Iran)
Abstract
567-812 Capacity Analysis of 10 Toll Plazas on the OOCEA Network
M.L. Zarrillo (USA)
Abstract
567-813 Modeling Transport Networks with Design Pattern: Application to Hybrid Traffic Simulations
W. Chaker, B. Moulin, and M. Thriault (Canada)
Abstract
567-814 Estimation of Driver Reaction Time from Detailed Vehicle Trajectory Data
Xiao Zhang and G.H. Bham (USA)
Abstract
567-815 Multi-Objective Strategies for Timing Signal Systems under Oversaturated Conditions
M.M. Abbas, H.A. Rakha, and P. Li (USA)
Abstract
567-816 Evaluation of Dual Regime Acceleration Model Applied to Left Turning Vehicles
S. Chandrasekhar and G.H. Bham (USA)
Abstract
567-818 Evaluation of Microscopic Lane Change Models using NGSIM Data
S. Kan and G.H. Bham (USA)
Abstract
567-820 Arterial Network Travel Time Estimation using Conditional Independence Graphs and State Space Neural Networks
A.K. Singh and G. Abu-Lebdeh (USA)
Abstract
Track Special Session 3: Biomedicine, Biomechanics, and Environmental Systems FreeSubscription
567-052 Biomechanical Modelling of Occupant Induced Centrifugal Loading on Automotive Glazing
C.K. Thorbole, S.A. Batzer, D.A. Renfroe, and D.S. Tanwar (USA)
Abstract
567-098 Development of a PMV-based Thermal Comfort Modelling
S.A.A. Shukor (Malaysia), K. Kohlhof (Germany), and Z.A.Z. Jamal (Malaysia)
Abstract
567-119 Time Series Analysis used for the Identification of Kartic Chalk Functioning: Example of Ranon Springs
A. Maqsoud (Canada)
Abstract
567-142 Modelling Land-Use Changes using a Novel Vector-based Geographic Cellular Automata
N. Moreno (Canada, Venezuela) and D.J. Marceau (Canada)
Abstract
567-143 Multi-Objective Pareto Optimization and Analysis of Diagnostic X-Ray Systems using Mathematical Modeling
J.N. Kroon (The Netherlands)
Abstract
567-144 Image-based Motion Control for the Bending Section of a Colonoscope
G. McMurray, D. Zhou, W. Daley, J. Munnae, and H. Lipkin (USA)
Abstract
567-182 Permanent Coexistence for a Linear Response Omnivory Model
J.A. Vance (USA)
Abstract
567-203 Agent-based Modelling Calibrated from Experimental Economics: Bidding Behaviour in a Water Market
S. Heckbert, A. Straton, A. Smajgl, and J. Ward (Australia)
Abstract
567-824 Effect of Variable Contact Area on Knee Articular Dissipation during 3D Gait Analysis
M. Desmarais and R. Aissaoui (Canada)
Abstract
567-825 Measurement Uncertainties during Manual Wheelchair Propulsion and Shoulder Kinetics
G. Desroches, R. Aissaoui, M. Boukhelif, and D. Bourbonnais (Canada)
Abstract
567-827 Computational Modeling of a Prosthetic Shoulder: Our Experience with the Anybody Modeling System
Y. Collet, P. Ttreault (Canada), J. Rasmussen (Denmark), N. Nuo, and N. Hagemeister (Canada)
Abstract
Abstracts may contain minor errors and formatting inconsistencies.
Please contact us if you have any concerns or questions.

What are Digital Object Identifers?


Rates (USD):   $176.40 (Hardcopy) ;  $149.94 (Online) ;  $176.40 (CD)

(The Hardcopy and CD proceedings also include the Online version)

For complete proceedings please choose one of the following:

   

Hard Copy $176.40
Online Edition $149.94
CD Edition $176.40
Individual Articles (Online): $40.00  
ISSN: N/A ;
ISBN: 978-0-88986-663-8 ;
ISSN (CD): N/A ;
ISBN (CD): 978-0-88986-664-5 ;
ISSN (Online): N/A ;

Topics will include, but are not limited to: MODELLING AND SIMULATION METHODOLOGIES - * Model Development * Bond Graph Modelling * Statistical and Probabilistic Modelling * Numerical Methods * Mathematical Modelling * Physically-based Modelling * Agent-based Modelling * Dynamic Modelling * 3-Dimensional Modelling * Continuous and Discrete Methodology * Computational Geometry * Time Series Analysis * Finite Element Methods * Simulation Tools and Languages * Discrete Event Simulation * Petri Nets * Object Oriented Implementation * Web-based Simulation * Monte Carlo Simulation * Distributed Simulation * Simulation Optimization * Simulation Uncertainty * Neural Networks * Artificial Intelligence * Expert Systems * Knowledge-based Systems * Fuzzy Systems * Genetic Algorithms * Data Modelling * Computer Aided Design * CASE Systems in Engineering Design * Multi-Paradigm * Visualization * Virtual Reality * Synthetic Environments * Applications; ENVIRONMENTAL SYSTEMS MODELLING - * Air Modelling and Simulation * Atmospheric Modelling * Hazardous Material * Mobile Source Emissions * Ecosystem Modelling * Hydrological Modelling * Aquatic Ecosystems * Marine Ecosystems * Freshwater Ecosystems * Biological Systems * Agricultural Modelling * Terrain Analysis * Meteorological Modelling * Earth System Modelling * Climatic Modelling * Natural Resource Management * Terrestrial Ecosystems; ENERGY AND POWER SYSTEMS MODELLING - * Energy Flow Modelling * Modelling of Energy Sources * Power Plant Modelling * Turbine Modelling * Transmission Line Modelling * Transient Analysis * Stability Studies * Harmonics Modelling * Power Quality Analysis * Fault Simulation * Power Network Simulation * SCADA Systems * Energy Demand Modelling * Energy Economics * Electricity Market Modelling; MODELLING IN BIOMEDICINE AND BIOMECHANICS - * Biomedical Modelling * Biomechanical Modelling * Medical Robotics * Medical Instrument Design * Patient Simulators * Surgical Simulators * Surgical Training * Surgical Modelling * Image-guided Surgery * Cardiovascular Modelling * Arterial Wall Mechanics * Respiratory Mechanics * Orthopedic Modelling * Joint Modelling * Limb Modelling * Dental Modelling * Muscular Modelling * Modelling of Sports Injuries * Medical Imaging * Medical Vision * Virtual Reality * Human Animation * Health Care Modelling * Tele-Medicine * Medical Education; APPLICATIONS IN MANAGEMENT AND OPERATIONS RESEARCH - * Business Process Simulation * Resource Management * Knowledge Management Systems * Operations Research * Economics * Optimization * Stochastic Models * Logic Programming * Operation and Production Management * Supply Chain Management * Work Flow Management * Total Quality Management * Logistics * Risk Analysis * Scheduling * Forecasting * Cost Benefit Analysis * Economic Revitalization * Financial Models * Accounting * Policy Issues * Regulatory Impact Analysis; APPLICATIONS IN AUTOMATION, CONTROL, AND ROBOTICS - * Industrial Automation * CAD/CAM * Human-Machine Interfaces * Flexible Manufacturing Systems * Assembly Planning * Material Handling * Process Automation * Intelligent Control * Process Control * Robot Design * Multi-Robot Systems * Tele-Robotics * Mobile Robots * Robust Robot Control * Motion Planning * Scheduling * Sensing and Data Fusion * Intelligent Agents * Virtual Reality * Fluid Power Technology; APPLICATIONS IN INFORMATION TECHNOLOGY AND COMMUNICATIONS - * Information System Management * Telecommunications * The Internet * Multimedia Systems * Wireless System Architectures * Network Simulation * Mobile Networks * 3rd and 4th Generation Networks * Congestion Control Mechanisms * Fluid Models * Protocols * RF Circuit Modelling * Software Engineering * Database Management * Quality of Service * Performance Modelling * Distance Education * E-Commerce * M-Commerce.

Loading Information

Go Back