A.F. Zobaa, M.I. Gilany, and M.M. Abdel Aziz


  1. [1] R.C. Dugan, M.F. McGranaghan, & H.W. Beaty, Electricalpower systems quality (New York: McGraw-Hill, 1996).
  2. [2] H.M. EL-Bolok & W. Shepherd, Effect of capacitance correctionon distortion factor for non-linear loads, Research Report, P/GSchool of Electrical and Electronic Engineering, University ofBradford, England, 1980.
  3. [3] D.E. Rice, Adjustable speed drives and power rectifier har-monics: Their effect on power system components, IEEEPetroleum and Chemical Industry Committee Annual Confer-ence, PCIC’84, San Francisco, 1984, paper no. PCIC-84-52.
  4. [4] P. Ziogas, Y. Kang, & V. Stefanovic, PWM control techniquefor rectifier filter minimization, IEEE Trans. on IndustryApplications, 21(5), 1985, 1206–1214. doi:10.1109/TIA.1985.349545
  5. [5] P. Ziogas, Y. Kang, & V. Stefanovic, Optimum system designof a three-phase rectifier inverter type of frequency changer,IEEE Trans. on Industry Applications, 21(5), 1985, 1215–1225. doi:10.1109/TIA.1985.349546
  6. [6] N.R. Zargari, G. Joos, & P.D. Ziogas, Input filter designfor PWM current-source rectifiers, IEEE Trans. on IndustryApplications, 30(6), 1994, 1573–1579. doi:10.1109/TIA.1994.350312
  7. [7] V.A. Katic & V.S. Vuckovic, The effects of distorted supplyon PWM rectifier AC filter design, PCIM’92, Nuremberg,Germany, 1992, 219–229.
  8. [8] V. Katic & D. Graovac, A method for PWM rectifier line sidefilter optimization in transient and steady states, IEEE Trans.on Power Electronics, 17(3), 2002, 342–352. doi:10.1109/TPEL.2002.1004242
  9. [9] H.M. EL-Bolok & W. Shepherd, The effect of source impedanceon the performance of thyristor controlled separately excitedD.C. motor with single-phase supply, Research Report No.275, P/G School of Electrical and Electronic Engineering,University of Bradford, England, January 1980.
  10. [10] IEEE recommended practices and requirements for harmoniccontrol in electrical power systems, IEEE Standard 519-1992,1992.
  11. [11] M.M. Abdel Aziz, E.E. Abou El-Zahab, A.M. Ibrahim, & A.F.Zobaa, Effect of connecting shunt capacitance on non-linearload terminals, IEEE Trans. on Power Delivery, 18(4), 2003,1450–1454. doi:10.1109/TPWRD.2003.817794
  12. [12] M.M. Abdel-Aziz, E.E. Abou El-Zahab, A.M. Ibrahim, & A.F.Zobaa, Comparing capacitive and LC compensators for powerfactor correction, 10th Int. Conf. on Harmonics and Qualityof Power, Rio de Janeiro, Brazil, October 6–9, 2002, 42–45. doi:10.1109/ICHQP.2002.1221403
  13. [13] M.M. Abdel-Aziz, E.E. Abou El-Zahab, A. M. Ibrahim, & A.F. Zobaa, Practical considerations on power factor correctionfor non-linear loads, 10th Int. Conf. on Harmonics and Qualityof Power, Rio de Janeiro, Brazil, October 6–9, 2002, 46–49. doi:10.1109/ICHQP.2002.1221404
  14. [14] IEEE standards for shunt power capacitors, IEEE Std. 18-1992,1992.
  15. [15] M. Ben-Daya & K.S. Al-Sultan, A new penalty function algo-rithm for convex quadratic programming, European Journalof Operational Research, 1, 1997, 155–163. doi:10.1016/S0377-2217(96)00138-5
  16. [16] P.F. Ribeiro, Tutorial on harmonics modelling and simulation,paper presented at IEEE PES Winter Meeting, Tampa, FL,February 1998.
  17. [17] J. Schonek, The singularities of the third harmonic, CahierTechnique Schneider Electric, 202, 2001, 8–9.

Important Links:

Go Back