Amit K. Bedaka, Chyi-Yeu Lin, and Shen-Tung Huang


  1. [1] B. Hein and M. Hensel, Intuitive and model-based on-lineprogramming of industrial robots: A modular on-line program-ming environment, IEEE International Conf. on Robotics andAutomation, Pasadena, CA, 2008, 3952–3957.
  2. [2] Most Advanced Robotics Simulation Software Overview,
  3. [3] K.M. Murphy, R.J. Norcross, and F.M. Proctor, CAD directedrobotic deburring, Proc. of the Second International Symposiumon Robotics and Manufacturing Research, Education, andApplications, Albuquerque, NM, 1988, 16–18.
  4. [4] J.Y. Kim, CAD-based automated robot programming in ad-hesive spray systems for shoe outsoles and uppers, Journal ofRobotic Systems, 21(11), 2004, 625–634.
  5. [5] F. Nagata, T. Hase, Z. Haga, M. Omoto, and K. Watanabe,CAD/CAM-based position/force controller for a mold polishingrobot, Mechatronics, 17(4), 2007, 207–216.
  6. [6] P. Neto and N. Mendes, Direct off-line robot programming viaa common CAD package, Robotics and Autonomous Systems,61(8), 2013, 896–910.
  7. [7] P. Neto, N. Mendes, R. Ara´ujo, J.N. Pires, and A.P. Moreira,High-level robot programming based on CAD: Dealing with un-predictable environments, Industrial Robot: An InternationalJournal, 39(3), 2012, 294–303.
  8. [8] K. Baizid, S. ´Cukovi´c, J. Iqbal, A. Yousnadj, R. Chellali,A. Meddahi, G. Devedˇzi´c, and I. Ghionea, IRoSim: Industrialrobotics simulation design planning and optimization platformbased on CAD and knowledgeware technologies, Robotics andComputer-Integrated Manufacturing, 42, 2016, 121–134.
  9. [9] S. Mitsi, K.D. Bouzakis, G. Mansour, D. Sagris, andG. Maliaris, Off-line programming of an industrial robot formanufacturing, International Journal of Advanced Manufac-turing Technology, 26(3), 2005, 262–267.
  10. [10] M. Sallinen and M. Sirvi¨o, Robotized system for prototypemanufacturing of castings and billets, in E. Trai and T. Trai(eds.), Mechatronics for safety, security and dependability ina new era (Oxford: Elsevier, 2006), 277–280.
  11. [11] Z. Pan, J. Polden, N. Larkin, S. Van Duin, and J. Norrish,Recent progress on programming methods for industrial robots,Robotics and Computer-Integrated Manufacturing, 28(2), 2012,87–94.
  12. [12] W. Sheng, N. Xi, M. Song, Y. Chen, and J.S. Rankin III,Automated CAD-guided automobile part dimensional inspec-tion, in Proc. of 2000 IEEE International Conf. on Roboticsand Automation, San Francisco, CA, 2000, 1157–1162.
  13. [13] H. Chen, W. Sheng, N. Xi, M. Song, and Y. Chen, CAD-basedautomated robot trajectory planning for spray painting offree-form surfaces, Industrial Robot: An International Journal,29(5), 2002, 426–433.
  14. [14] W. Sheng, N. Xi, M. Song, Y. Chen, and P. MacNeille,Automated CAD-guided robot path planning for spray paintingof compound surfaces, Proc. of 2000 IEEE/RSJ InternationalConf. on Intelligent Robots and Systems, Las Vegas, NV, 2000,1918–1923.
  15. [15] Z. Pan and H. Zhang, Robotic machining from programming toprocess control: A complete solution by force control, IndustrialRobot: An International Journal, 35(5), 2006, 400–409.
  16. [16] C. Deniz and M. Cakir, A novel designed interactive trainingplatform for industrial robot offline programming and roboticseducation, International Journal of Robotics and Automation,32(6), 2017, 665–672.
  17. [17] Kuka Robot Software,
  18. [18] ABB Robot Studio r ,
  19. [19] Roboguide – FANUC Simulation Software,
  20. [20] J. Polden, Z. Pan, N. Larkin, S.V. Duin, and J. Norrish, Offlineprogramming for a complex welding system using DELMIAautomation, in T.J. Tarn, S.B. Chen, and G. Fang (eds.),Robotic welding, intelligence and automation. Lecture notes inElectrical Engineering, Vol. 88 (Berlin, Heidelberg: Springer,2011), 341–349.
  21. [21] D.M.A. Lee and W.H. Elmaraghy, ROBOSIM, a CAD-basedoffline programming and analysis system for robotic manipu-lators, Computer-Aided Engineering Journal, 1990, 141–148.
  22. [22] RoboDK Simulation and OLP for robots,
  23. [23] X.F. Zha and H. Du, Generation and simulation of robottrajectories in a virtual CAD-based off-line programming en-vironment, International Journal of Advanced ManufacturingTechnology, 17(8), 2001, 610–624.
  24. [24] H. Wu, H. Deng, C. Yang, Y. Guan, H. Zhang, and H. Li,A robotic off-line programming system based on SolidWorks,Robotics and Biomimetics (ROBIO), IEEE InternationalConf., Zhuhai, China, 2015.
  25. [25] OPEN CASCADE,
  26. [26] A.K. Bedaka and C.Y. Lin, Autonomous path generationplatform for robot simulation, 2017 International Conf. onAdvanced Robotics and Intelligent Systems, Taipei, Taiwan,2017, 63–68.
  27. [27] A.K. Bedaka and C.Y. Lin, CAD-based robot path planningand simulation using OPEN CASCADE, Procedia ComputerScience, 133, 2018, 779–785.
  28. [28] J.M. McCarthy, Introduction to theoretical kinematics(Cambridge, MA: MIT Press, 1990).
  29. [29] Y. Liu, M. Cong, H. Dong, and D. Liu, Reinforcement learningand EGA-based trajectory planning for dual robots, Interna-tional Journal of Robotics and Automation, 33(4), 2018.
  30. [30] M. Alamia, Article – World, view and projection transformation(California: Coding Labs, 2014).
  31. [31] N.S. Pollard, J.K. Hodgins, M.J. Riley, and C.G. Atkeson,Adapting human motion for the control of a humanoid robot,Proc. of the 2002 IEEE International Conf. on Robotics andAutomation, Washington, DC, 2002, 1390–1397.
  32. [32] J.L. Blanco, A tutorial on SE (3) transformation parameter-izations and on-manifold optimization (Spain: University ofMalaga, 2014).
  33. [33] M.M. Fateh, Fuzzy task-space control of a welding robot,International Journal of Robotics and Automation, 25, 2010,206–3437.
  34. [34] C.Q. Huang, S.J. Shi, X.G. Wang, and W.K. Chung, Parallelforce/position controls for robot manipulators with uncertainkinematics, International Journal of Robotics and Automation,20, 2005, 206–2721.
  35. [35] J.H. Kim, D.P. Roberts, J. Meusch, and S. Rahmatalla, Kine-matic and kinetic evaluation of a throwing model using motionprimitives, International Journal of Robotics and Automation,30, 2015, 206–4280.

Important Links:

Go Back